|
|
|
|
|
|
|
|
 |
Take control of your aquarium with Prime, the world’s Frst chiller to offer a heater and ultraviolet sterilizer as modular upgrades. Integrate the elements you need and leave out the ones you don’t for a single system that will help stabilize things, both in and around your tank.
The Ultimate Stress Reducer
Cool, heat and sterilize with just one device. The Prime Chiller will not only keep your tank buddies cool on those hot summer days, but also incorporates sterilization and heating for the ultimate in stress reduction. Expansion ports for both a UV sterilizer and heater give you the freedom to upgrade at your pace.
Heat Removal Machine.
Super quiet, high ef?ciency compressor from Matsushita delivers more BTU’s than any comparable chiller on the market today. The manifold evaporator design forces water to pass through each components chamber, maximizing its ef?ciency. The corrosion resistant evaporating coil ef?ciently transfers heat and can be used in both fresh and salt water.
Intelligent Design, Inside and Out.
The unique chassis design integrates structural supports for strategic placement of the compressor, fan, evaporator and condenser, maximizing thermal ef?ciency and ensuring a safe and sound arrival. A 255 cfm fan with composite blade effortlessly and quietly draws cool air over the heat producing components, then exits through side and front louvers of the stylish black contoured housing. Cool features with capacity to spare makes this the Prime candidate for your cooling needs.
Prime Inline Chillers:
- Models 1/4 and 1/3 hp feature ports for modular UV & Heater Upgrades
- Models 1/2 and 3/4 hp feature ports for modular UV Upgrades
- UV and heater ports not available on 1/10th HP, 1 HP and larger
Specifications:
- Horsepower: 1/3hp
- BTU: 4,524
- Volts/Amps: 115V/7.41A
- Flow Rate: 12-22gpm
- Inlet/Outlet: 1in FIPT
- Temp. Range: 60-80°F
- Thermostat Type: Dual
- w/ Thermal Expansion Valve: No
- Dimensions: 17.5in x 11in x 15.5in
|
 |
|
|
|
|