45mm, 1 3/4" Diamond Coated Glass Drill Bit / Hole Saw for 1" Bulkheads.
Questions on 45mm, 1.75" Diamond Coated Glass Drill Bit / Hole Saw for 1" sch. 40 Bulkheads
No questions asked yet
Ask Your Own Question
-
Works great Review by Ryan
Product Rating: Received a day earlier than said I would. Cut the glass flawlessly with use of a guide and running water. Have to go slow to start and once the side of bit get into glass. Once the tip cleared, money all day. (Posted on 7/26/2016)
-
excellent hole saw Review by mark
Product Rating: drilled 28 tanks ,,still got life on saw (Posted on 4/29/2015)
-
45mm hole saw for 1"bulkheads Review by Scotty
Works like a champ, i used some plumbers putty to build a water wall, then went slowly and presto! Take your time, and its easy. If you any questions about cutting glass do a search, this tool works great.. (Posted on 7/17/2011)
-
Pleasantly Surprised Review by DorkFish
Well, as a first time tank driller...It got the job done. I was actually surprised with how easy it cuts the glass. The finished edge wasn't pretty but that could be due to operator error. I drilled three 10 gallon tanks: First tank was drilled slow. Took a little while but got it cut. 2nd tank: Slow half way through then changed to fast. It got it cut. 3rd tank: I think I got a little impatient used fast speed the entire time. Got all the way to the end and it cracked the tank. So I think the slower speed is the way to go. (with a little patients) (Posted on 9/26/2010)