50 GPD Reverse Osmosis Membrane
Other products by AQUAFx

Item #: RO-AFx-ROM-50
Our Price: $39.95
Availability: In Stock

****Fits most standard 10" RO & RO/DI Systems including KENT, CoraLife, Seachem, AquaFx, SpectraPure.****

We recommend flushing for 5 minutes to prevent earlier clogging.
The first full tank of permeate should be discard. Do not use this initial permeate for drinking water of food preparation.
Keep elements moist at all times after initial wetting. If operating limits and guidelines given in this specification are not strictly followed, the limited warranty will be null and void.
To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
The membrane shows some resistance to short-term attack by chlorine (hypochlorite).
Continuous exposure, however, may damage the membrane and should be avoided.

Product Specifications:

* Model Number: VX-TW30-50D
* Membrane Type: Polyamide Thin-Film Composite
* Maximum Operating Temperature: 113°F (45°C)
* Maximum Operating Pressure: 125 psi (8.6bar)
* Maximum Feed Flow Rate: 2.0 gpm (7.6lpm)
* Ph Range, Continuous Operation: 3.0 ~ 10
* Maximum Feed Silt Density Index: <5
* Free Chlorine Tolerance: <0.1 ppm
* Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, we recommend removing residual free chlorine by pretreatment prior to membrane exposure.


Average Rating:
(based on 1 review)

Showing 1 Review:

by Jim
on 9/22/2009

The price of this item is what really was the reason that I purchased it from Aquacave.I must have a water problem at home,because these filters don't last anywhere near the time that the manufacturing co.say they will last. Aquacaves price was cheaper than another online or local distributor that I have dealt with.
Review and Rate this Item
SSL Certificate Provider