Direct Connect 4 Heavy Duty by Neptune Systems

Direct Connect 4 Heavy Duty by Neptune Systems.

**** PRODUCT MANUAL ****

The Direct Connect 4 modules features 4 relay controlled outlets each capable of switching 120V at 12 Amps. The DC4 enables a very reliable hardwired connection between the AquaController and all controlled devices - X10 interference problems caused by noisey electronic ballasts (i.e. Blueline) are eliminated. NOTE: This module is suitable for use on ICECAP™ ballasts; it utilizes large relays which can withstand the high inrush currents on these ballasts.

- 4 120V Outlets (Max 12 Amps, total current must be less than 15 Amps).
- High reliability direct wired connection to the AquaController (does not use X10).
- Can be used with electronic ballasts which cause X10 interference.
- Up to 8 DC4s can be daisy chained together for up to 32 switched outlets.
- Control Interface (IM513) can be last device in chain (Simultaneous X10 and hardwired control)
- Fuse Protected
- 4 Mounting Holes for easy installation. (5.8" x 4.6" x 2.4")
- Recommended for use with ICECAP™ ballasts