847-775-0640 Call us M-F 9-5:30 CST

AQUAFx

AQUAFx

Brand categories

33 Item(s)

per page

Grid  List 

Set Descending Direction
  • Taste & Odor Polisher

    Taste & Odor Polisher

    Used as a final polisher for your drinking water system. Removes unwanted tastes & odor.
    $18.95
  •  75 GPD Reverse Osmosis Membrane CSM RE1812

    75 GPD Reverse Osmosis Membrane CSM RE1812

    ****Fits most standard 10" RO & RO/DI Systems including KENT, CoraLife, Seachem, AquaFx, SpectraPure.****

     75 GPD Reverse Osmosis Membrane CSM RE1812

    We recommend flushing for 5 minutes to prevent earlier clogging.
    The first full tank of permeate should be discard. Do not use this initial permeate for drinking water of food preparation.
    Keep elements moist at all times after initial wetting. If operating limits and guidelines given in this specification are not strictly followed, the limited warranty will be null and void.
    To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
    The membrane shows some resistance to short-term attack by chlorine (hypochlorite).
    Continuous exposure, however, may damage the membrane and should be avoided. 

    $37.95
  • Long Reach Chrome Faucet for 1/4" Tubing

    Long Reach Chrome Faucet for 1/4" Tubing

    Long Reach Chrome Faucet for 1/4" Tubing

    $12.95
  • RO Filter Housing Wrench

    RO Filter Housing Wrench

    $4.95
  • AQUAFx Barracuda 4-Stage RO/DI System*

    AQUAFx Barracuda 4-Stage RO/DI System*

    The Barracuda is a Reverse Osmosis and Deionization system. The standard unit comes with 1-micron sediment filtration, a carbon block for VOC reduction, a DOW membrane, and a color indicting deionization (DI) resin cartridges.
    $227.95
  • Empty Refillable RO Reverse Osmosis Cartridge 20" x 2.5"

    Empty Refillable RO Reverse Osmosis Cartridge 20" x 2.5"

    Empty Refillable RO Reverse Osmosis Cartridge 20" x 2.5"

    $14.95
  • Complete Drinking Water Kit

    Complete Drinking Water Kit

    Add drinking water to your current RO or RO/DI system...
    $119.95
  • Dual Inline TDS Meter

    Dual Inline TDS Meter

    Dual Inline TDS Meter

    Measure the tap water coming in vs. the purified water going out of your system at any time. Use the monitor to determine when the filters need to be changed. Install the meter for your customers so they'll always know how their system is performing.

    FEATURES

    * Displays TDS levels of the feed water and product water with in & out electrode probes.
    * Highly efficient and accurate due to its advanced microprocessor technology.
    * Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
    * Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.)
    * Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
    * Comes equipped with John Guest Quick-Connect T-fittings as shown.
    * Installs quickly and easily.

    SPECIFICATIONS

    * Range: 0-9990 ppm
    * Accuracy: ±2%
    * Cable Length: 24.5" (including sensor)
    * Fittings: 1/4" standard, also available with 3/8" or 1/2"
    * Power source: 2 x 1.5V button cell batteries (included)
    * Battery life: approx. 1000 hours of continuous use
    * Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
    * Weight: 79.4 g (2.8 oz.)

    (7)
    $34.95
  • 4.4 Gal RO Pressure Tank

    4.4 Gal RO Pressure Tank


    4.4 Gal RO Pressure Tank.

    Pre-pressurized bladder tanks. Pressured bladder tanks have several advantages over atmospheric tanks. Pressurized tanks do not require any delivery pump and are less likely to have microbial contamination versus atmospheric tanks.
    $49.95
  • Drain Clamp for 1/4" Tubing

    Drain Clamp for 1/4" Tubing

    $4.95
  • Inline Sink Adaptor for 1/4" Tubing

    Inline Sink Adaptor for 1/4" Tubing

    Inline Sink Adaptor for 1/4" Tubing

    $3.95
  • AQUATECH 8800 RO Booster Pump

    AQUATECH 8800 RO Booster Pump

    AQUATECH 8800 RO Booster pump Assembly.

    Includes:

    • * AquaTech 8800 booster pump, Model No: B851-2J03-B423
    Demand activated (When pressure decreases).

    For low pressure situations. Every reverse osmosis system requires a minimum of 35 psi to operate.

    Aquatec ® CDP-8800 Booster Pump For RO Systems Over 50 GPM - CDP-8800 Series High Flow). The CDP-8800 Series pumps are also compatible with most hydraulic shut-off valves with the optional PSW shut off tank controller switch. 
    Distinguishing Features & Operating Benefits: Outstanding toughness, durability. Designed for 30,000+ operating hours. 
    Adjustable pressure boost between 40-120 PSI. Outlet pressures up to 160 PSI. EMI/RFI electronic noise suppression. Extremely quiet operation, less than 45 DBA. Expels trapped air, eliminates air locks. Runs dry without damage. 
    Pumphead can be mounted up or down. Self-priming, 60 inch lift. Improved venting system removes moisture. Low voltage (12-24V) for maximum safety. Corrosion resistant exterior. 

    $99.95
  • AQUAFx Mako RO/DI System

    AQUAFx Mako RO/DI System

    The Mako is a Reverse Osmosis and Deionization system. The standard unit comes with 1-micron sediment filtration, a carbon block for VOC reduction, a DOW membrane, and 2 color indicting deionization (DI) resin cartridges.
    $269.95
  •  AQUATECH 8800 RO Booster pump Kit

    AQUATECH 8800 RO Booster pump Kit

    AQUATECH 8800 RO Booster pump Assembly.

    Includes:

    • * AquaTech 8800 booster pump, Model No: B851-2J03-B423
    • * Power transformer 
    • * 40 psi pressure switch
    • * 2 x 3/8" x 1/4" Jaco Reducers
    (7)
    $144.95
  • Matrikx +CTO Carbon Block Filter 5 micron, RO Reverse Osmosis 9.75" x 2.5" Cartridge

    Matrikx +CTO Carbon Block Filter 5 micron, RO Reverse Osmosis 9.75" x 2.5" Cartridge

    Matrikx +CTO Carbon Block Filter 5 micron, RO Reverse Osmosis 9.75" x 2.5" Cartridge. 32-250-125-975

    ****Fits most standard 10" RO & RO/DI Systems including KENT, CoraLife, Seachem, AquaFx, Vertex, SpectraPure.****

    The KX Matrikx +CTO Carbon Block Filter 32-250-125-975. 2.5" × 9.75" is certified to reduce chlorine taste and odour from your drinking water. It delivers you with the best possible combination of meaningful innovation, useful features and lasting value.
    These filters are optimized for applications where they perform the role of both a sediment and activated carbon filter. The extrusion process allows the production of a carbon block with more carbon, but a lower pressure drop. This enables a MATRIKX CTO filter to deliver extended life while removing sediment, chlorine taste and odor and organic contaminants from water, aqueous solutions or suspensions. The MATRIKX CTO is also widely used in filtering organic solvents. The MATRIKX CTO KX Filter is ideal for use in residential and commercial water purification systems, food service, pre- and post-RO systems.
    (3)

    Starting at: $7.95

  • 60PSI 1/4" JG Pressure Switch

    60PSI 1/4" JG Pressure Switch


    60PSI 1/4" JG Tank Pressure Switch

    $19.95

    Out of stock

33 Item(s)

per page

Grid  List 

Set Descending Direction
  Loading...