John Guest Speed-Fit Fittings

John Guest 1/4"JG x 3/8"COMP Female Compression Fitting - PP6008U9W

The John Guest 1/4 in. O.D. x 3/8 in. Push-to-Connect Female Compression Connector (10-Pack) fittings are manufactured from white polypropylene and equipped with EPDM O-rings utilizing John Guest's push-fit technology to make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique John Guest collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.

John Guest 3/8"JG x 3/8"COMP Female Compression Fitting - PP6008U9W

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.

John Guest 3/8" x 3/8" Bulkhead. Tube O.D.: 3/8"
Tube O.D.: 3/8"

John Guest 1/4" 2-way Divider

John Guest Part# : PM2308S
Tube O.D.: 1/4"
How to make a connection:

* Cut tube square
It is essential that the outside diameter be free of score marks and that burrs and sharp edges be removed before inserting into fitting. For soft or thin walled plastic tubing we recommend the use of a tube insert.
* Insert tube
Fitting grips before it seals. Ensure tube is pushed in to the tube stop.
* Push up to tube stop
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the "O" ring provides a permanent leak proof seal.
* Pull to check secure
Pull on the tube to check it is secure. It is good practice to test the system prior to leaving site and/or before use.

John Guest 1/2" x 1/2" Bulkhead. Tube O.D.: 1/2"
Tube O.D.: 1/2"

Precision Needle Valve with 1/4"John Guest Style Fittings

For quick, easy and accurate regulation of flow applications, look no further than our Precision Needle Valve. Featuring a Teflon® stem seal and Black Filled Polyester Knob, this is both a versatile and durable solution for complete control over any flow functions.

Exclusive Features

• Heavy-duty PVC construction maximizes life and durability.
• Large knob for maximum control.
• Teflon® seals ensure leak-free operation.
• Push-connect fittings make installation a breeze.
• Panels mount for clean installation.

Technical Data

• Material Grey PVC
• Teflon® stem seals
• EPDM stem seal
• Black filled polyester knob & black nylon hex nut
• Maximum panel thickness: .125"
• Panel mount hole size: .875"
• Panel mount threads: 7/8-20
• 2.5° tip (6 turns)
• Maximum pressure: 125 psi
• Maximum temperature: 140°F
• Made in the USA