John Guest 1/4" 2-way Divider

847-775-0640 Call us M-F 9-5:30 CST

John Guest 1/4" 2-way Divider

Product code: 1486
PL-JG-2308S

Be the first to review this product

Availability: In stock

Ships today if ordered in the next 3 hours and 36 minutes!

$4.95
Reward Points Policy 49 AQUAPOINTS
OR

Color: White
John Guest Part# : CI010822W
Tube O.D.: 1/4"
Thread NPTF: 1/4"

John Guest Part# : PM2308S
Tube O.D.: 1/4"
How to make a connection:

* Cut tube square
It is essential that the outside diameter be free of score marks and that burrs and sharp edges be removed before inserting into fitting. For soft or thin walled plastic tubing we recommend the use of a tube insert.
* Insert tube
Fitting grips before it seals. Ensure tube is pushed in to the tube stop.
* Push up to tube stop
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the "O" ring provides a permanent leak proof seal.
* Pull to check secure
Pull on the tube to check it is secure. It is good practice to test the system prior to leaving site and/or before use.

Disconnecting:

Push in Collet and remove tube

To disconnect, ensure the system is depressurized before removing fitting. Push in Collete squarely against face of fitting. With the Collete held in this position, the tube can be removed. The fitting can then be re-used.

Questions on John Guest 1/4" 2-way Divider

No questions asked yet

Please Sign up or Login to ask a question

Write Your Own Review

Only registered users can write reviews. Please, log in or register

4.95 In stock
  Loading...