Tunze TurbelleMasterStream 6515A small sample calculation using Turbelle masterstream 6515 (150 m/h 280 W) reveals that energy efficient water movement results in enormous cost effectiveness:
Tunze TurbelleMasterStream 6515.
A small sample calculation using Turbelle masterstream 6515 (150 m/h 280 W) reveals that energy efficient water movement results in enormous cost effectiveness:Tank volume: 60 m, flow selection by centrifugal pump (32 m/h 2,200 W). At an annual operating time of 8,760 hours and a kilowatt price of EUR 0.20 this results in a cost saving of EUR 3,364 per annum !
The Turbelle masterstream are electronically speed-controlled pumps operating on safety extra-low voltage of 12 V to 24 V. They can be used ideally for water circulation, wave action or wave-and-tide simulations. The models 6512 and 6515 come with Multicontroller 7096.
A 12 V VERSION FOR SWIMMING POOLS
Model 6512 in 12 V technology and a flow rate of 110,000 l/h (29,058.9 USgal./h) has been designed especially for swimming pools or large aquariums.
100 PER CENT CORROSION-RESISTANT
All parts of the pumps are made of sustainable active microbicidal (SAN) polymers and polyoxymethylenes (POM); the motor axle is made of titanium alloy; the motor and the electronics are cast in polyurethane (PU) resin.
NO EXTERNAL CONTROL
The pump control is integrated completely in the motor block ensuring a low-maintenance operation with high efficiency and ideal water cooling. All Turbelle masterstream pumps only require one external power supply unit or safety connector with a corresponding direct-current source (battery, solar cell, et cetera).
NO PROBLEM IN CASE OF POWER FAILURE
Fitted with Safety Connector 6515.50, Turbelle masterstream can be operated on every 11 V to 24 V direct-current source (battery, solar cell). The safety connector permits normal operation with the TUNZE power supply unit, but in case of a power failure it will automatically switch over to a car battery or a direct-current source.
Turbelle masterstream 6515(6515.000)
for aquariums over 20,000 litres (5,283.4 USgal.),
Flow rate: 50,000 to 150,000 l/h (13,208 to 39,625.8 USgal./h),
Maximum flow velocity: 3.7 m/s (145.6 in./sec.),
Energy consumption: 280 W - 24V,
Power supply unit: 100 240 V / 50 60 Hz 24 VDC,
Cable length: 10 m (393.6 in.),
Dimensions: L 340 x W 165 x H 227 mm (L 13.4 x W 6.5 x H 8.9 in.),
Ejection: diam. 125 mm (4.9 in.),
Attachment to pipe, diam. 32 mm (1.25 in.),
Supplied with Wavecontroller 7092.
Hose clamps for attachment to PVC pipe or rod, diam. 32 mm (1.25 in.).
The pump housing is used as a huge intake strainer; the suction area is 3.95 times larger than the area. The Turbelle masterstream needs no additional intake strainer.
Performance propeller with low rotational speed and axle made of titanium alloy.
Flow ejector, diam. 125 mm (4.91 in.) with integrated protection against injury in keeping with European standard EN 60335-1. Corrosion-resistant screws with nuts.
An intelligent and innovative micro-processor controlled PM motor operating on safety extra-low voltage of 12 V to 24 V is the core of the new Turbelle masterstream.
Questions on Tunze Turbelle MasterStream 6515
No questions asked yet