In the coral reef tank, the calcium hydrogen carbonate content is an important parameter on which the lime formation and therefore the growth of the corals at decisive measure depends.
It takes strong influence as a main component of the bumper system to the pH-value. Without suitable countermeasure accompany very soon it to lime lack combined with growth reduced at least strongly lime consuming organisms.
The KORALLIN calcium reactor C 1502 allowed in simple, elegant way and with high efficacy to produce calcium hydrogen carbonate including the necessary balance carbonic acid and the fish-tank water continuous lead. It becomes ready for immediate use operating with integrated Eheim pumps (ceramic axis + carbon bearings) with special substrate supplied to the connection to usual CO2 devices, is sufficient for tanks up to 1500l and in a filled manner highest quality control requirements.
On account of its small overall height (approx. 400mm) it can become readily set up under the fish-tank, also into the filter box!
Korallin C-1502 Specifications:
- Rated for up to 400gal.
- Reactor height: approx. 15.75"
- Diameter: 4.50"
- Ground: 6.30"
- Filling amount: 3 kgs (6.6lbs)
- Pump: Eheim 1048
Questions on Korallin C1502 Calcium Reactor
No questions asked yet
Ask Your Own Question
Korallin C1502 Calcium Review by mike
This is my first reactor and was easy to setup. So far after a few weeks the calcium levels are stable. No more bionic. Now trying to get levels to rise. cal around 420 and alkalinity 11. Tank is 180 g with med. level of corals. (Posted on 7/21/2009)
Write Your Own Review
- Korallin C1502 Calcium Review by mike
- This is my first reactor and was easy to setup. So far after a few weeks the calcium levels are stable. No more bionic. Now trying to get levels to rise. cal around 420 and alkalinity 11. Tank is 180 g with med. level of corals. (Posted on 7/21/2009)