|
|
|
|
|
|
|
|
 |
Features:
* High quality all cast acrylic body construction
* Downflow media chamber design found superior to fluidized reactors in operation, does not cause dusting of media
* Designed for very low and efficient CO2 use
* Clear cast acrylic reactor chamber
* Unique dual inlet, self filling pcv bubble counter & water inlet
* Commercial grade PVC/ Stainless check valve with quad ring seat and 1psi cracking pressure
* Free, removable all PVC reverse flow media reactor on the tank return. Fill with Phosphate removing media or Calcium Media for a second stage reactor.
* Designed to use any calcium media available without causing phosphate problems in your tank if filled half way with phosphate removing media
* Oversized & Quiet Eheim 1250 Water Pump for the best efficiency from your CO2 gas.
* High quality unions on all fittings for easy service and cleaning
* Special all black fittings
* Includes all hoses and reliable non leaking Jaco fittings for water and CO2
* Includes PH probe holder for PH monitor or better a PH controller
* Compact and Quiet operation
* Easy hookup. Only three lines needed (Water in, water out and CO2 in.)
CR300 Specifications:
* Total Height: 24"
* Footprint: 8.5" x 8.5"
* Tank Size: up to 300 Gallons
* Chamber OD: 4" x 18"
* Water Inlet: 1/4" Jaco fitting
* Water Outlet: 1/4" Jaco fitting
* Feed Method: Siphon/Powerhead
* Water Pump: Eheim 1250
* Media Capacity: 10 lb
* PH Probe Holder: Standard
* Bubble Counter: Standard
* High quality check valve
* Pump inlet bulkhead, no glued fittings here
* Pressure tested to 10 psi
|
 |
| 1 Customer Review |
| 5 Star: |
 |
0 |
Average Customer Rating
 4.0
out of 5 100% recommend it to
friends
|
| 4 Star: |
|
1 |
| 3 Star: |
|
0 |
| 2 Star: |
|
0 |
| 1 Star: |
|
0 |
|
|
|
Good Reactor
by
Salty
from
Oak Ridge, TN
on
7/22/2008
Recommends it to Friends:
Yes
Initial unit had a defect, Gary at AE Tech took care of issue. After which, units performs as it should.
Was this review helpful to you? YES /
NO
|
|
|
|
|