|
|
|
|
|
|
|
|
 |
The Direct Connect 4 modules features 4 relay controlled outlets each capable of switching 120V at 12 Amps. The DC4 enables a very reliable hardwired connection between the AquaController and all controlled devices - X10 interference problems caused by noisey electronic ballasts (i.e. Blueline) are eliminated. NOTE: This module is suitable for use on ICECAP™ ballasts; it utilizes large relays which can withstand the high inrush currents on these ballasts.
- 4 120V Outlets (Max 12 Amps, total current must be less than 15 Amps).
- High reliability direct wired connection to the AquaController (does not use X10).
- Can be used with electronic ballasts which cause X10 interference.
- Up to 8 DC4s can be daisy chained together for up to 32 switched outlets.
- Control Interface (IM513) can be last device in chain (Simultaneous X10 and hardwired control)
- Fuse Protected
- 4 Mounting Holes for easy installation. (5.8" x 4.6" x 2.4")
- Recommended for use with ICECAP™ ballasts
|
 |
| 1 Customer Review |
| 5 Star: |
 |
0 |
Average Customer Rating
 4.0
out of 5 100% recommend it to
friends
|
| 4 Star: |
|
1 |
| 3 Star: |
|
0 |
| 2 Star: |
|
0 |
| 1 Star: |
|
0 |
|
|
|
Good product
by
marct
from
Canada
on
7/30/2008
Recommends it to Friends:
Yes
Works good with all my equipment. Seems to not like 400W ballasts but not sure if it is the product or just bad ballasts.
Was this review helpful to you? YES /
NO
|
|
|
|
|