|
|
|
|
|
|
|
|
 |
The Direct Connect 8 modules features 8 solid-state controlled outlets each capable of switching 120V at 6 Amps. The DC8 enables a very reliable hardwired connection between the AquaController and all controlled devices - X10 interference problems caused by noisey electronic ballasts (i.e. Blueline) are eliminated. NOTE: This module is suitable for use on ICECAP™ ballasts.
- 8 120V Outlets (Max 6 Amps, total current must be less than 15 Amps).
Compact custom aluminum enclosure (8.8" x 3.35" x 1.6").
- High reliability direct wired connection to the AquaController (does not use X10).
- Can be used with electronic ballasts which cause X10 interference.
- Completely Silent Operation - uses solid state relays.
- "Soft-Start" for reduced pump wear.
- Up to 5 DC8s can be daisy chained together for up to 40 switched outlets.
- All 8 outlets independently controllable.
- Control Interface (IM513) can be last device in chain (Simultaneous X10 and hardwired control)
- Fuse Protected
- 4 Mounting Holes for easy installation
- Recommended for use with ICECAP™ ballasts
|
 |
|
|
|
|