847-775-0640 Call us M-F 9-5:30 CST

Trigger Systems Sapphire 39 Refugium Sump

Product code: 6114
FT-TS-SAP39

Be the first to review this product

Availability: In stock

Ships tomorrow if ordered in the next 23 hours and 7 minutes!

$524.99
Reward Points Policy Earn 26,249 AQUAPOINTS
OR

Trigger Systems Sapphire 39 Refugium Sump

The Sapphire series introduces several new features not found anywhere else. Some of the features of the Sapphire sumps are:

  • Interchangeable plates (PAT PENDING)
  • Lid to prevent splashing
  • Adjustable water height
  • Self adjusting foam block platform (PAT PENDING)
  • Dual platforms
  • Protein skimmer section
  • Refugium section
  • Sapphire blue coloring to block light and prevent unwanted algae growth in other sections

Trigger Systems Sapphire 39 Refugium Sump

The Sapphire series introduces several new features not found anywhere else. Some of the features of the Sapphire sumps are:

  • Interchangeable plates (PAT PENDING)
  • Lid to prevent splashing
  • Adjustable water height
  • Self adjusting foam block platform (PAT PENDING)
  • Dual platforms
  • Protein skimmer section
  • Refugium section
  • Sapphire blue coloring to block light and prevent unwanted algae growth in other sections

Interchangeable Plates

Each Emerald sump comes with two plates that can be placed into Section 1:
  • Filter Sock Plate
  • Foam Block Plate

The filter sock plate is installed when the included 100 micron filter socks are desired.

The foam block plate is perforated with holes and comes with a foam sponge block filter. The foam block plate can be used when filter socks are not desired or in the case when the filter socks need to be changed or cleaned but replacements socks are not readily available but yet mechanical filtration is needed. In this case, simply remove the filter sock plate and install the perforated foam block plate and then place the included foam sponge block filter in place.

Adjustable Water Level

Water level in the sump is adjustable from 7” to 9.5” to accommodate for the water height requirements for different protein skimmers.

Self Adjusting Foam Block

As the water level is adjusted by sliding the wall up and down, the foam block sponge filter and the perforated plate that it sits on will also move up and down automatically. This is important to maintain the correct location of the foam block sponge filter with respect to the sump water height.

Probe Holder

All Sapphire sumps come with a probe holder that can hold up to three probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes.

Hose Holder

All Sapphire sumps also come with 4 holes in the top support brace for holding in place 1/4” OD tubing from reactors, dosing pumps, ATO, etc.

Trigger Systems Sapphire 39 Specifications: 

  • Dimensions: 39" long x 16" wide x 15" tall.
  • External wall thickness: 1/4" acrylic
  • The skimmer/drain section: 14" x 15.5".
  • The refugium section:  10.5" x 15.5".
  • And the return section:  6" x 15.5".
  • Total Water Volume: 40 gallons
  • Skimmer Water Level: 7" to 9.5" adjustable
  • Drain Input Fittings: 2 x 1" and 3 x 1" (both drain plates are included)
  • Filter Socks: 3

Questions on Trigger Systems Sapphire 39 Refugium Sump

No questions asked yet

Ask Your Own Question









Write Your Own Review

You're reviewing: Trigger Systems Sapphire 39 Refugium Sump

How do you rate this product? *

Product Rating: 1 stars 2 stars 3 stars 4 stars 5 stars
524.99 In stock
  Loading...