847-775-0640 Call us M-F 9-5:30 CST

Neptune Systems

Neptune Systems

Neptune Systems is one of the world’s leading manufacturers of aquarium controllers. The company was founded in 1995 for the purpose of developing affordable water quality monitoring and control instrumentation. Their engineering team has extensive expertise in computer hardware and software system design as well as a background in water quality analysis. Neptune Systems uses these finely-honed engineering skills to develop innovative monitoring and control solutions for use in reef and fresh water aquariums, aquaculture tanks, hydroponics systems and general laboratory use. Neptune Systems is best known for their AquaController line. The company is known for their innovation and customer centricity. Our flagship product, the Apex AquaController, is the industry leading aquarium monitoring and control system controlling tens of thousands of aquariums worldwide. And now, with our new Apex Fusion cloud based service, we are poised to be the “Nest” of the aquarium world.

Items 1 to 36 of 63 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  • Neptune Systems SV1 Solenoid Valve

    Neptune Systems SV1 Solenoid Valve

    Neptune Systems SV1 Solenoid Valve

    This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical connection on this solenoid valve fits the DC24 accessory ports found on the FMM, 1Link, and Energy Bar 832 products. Common uses include safety stops for RODI systems, CO2 systems on calcium reactors, and many other places where you want to control the on/off flow of water, air, or other gasses.

    This solenoid valve can also be used with our standalone 24VDC power supply (not included) if you do not own one of the above products and want to use this solenoid valve with your Energy Bar 8 or Energy Bar 4.

    $29.95
  • Neptune Systems Lunar Simulator LEDs (3)

    Neptune Systems Lunar Simulator LEDs (3)

    Neptune Systems Lunar Simulator LEDs (3)Want to more accurately simulate the natural environment for your tank inhabitants?Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Many corals continue to grow under moonlight conditions and for some fish and coral it is important for the reproductive process. Also, night predators come out and cruise, while prey go into hiding.The other benefit of moonlights is that it extends the time you can enjoy your aquarium and in a totally different way. We all like to go to our tank with a flashlight and see whats going on, but it can often startle many creatures and send them into hiding. With a moonlight, your tank has just enough light for you to see many of the fascinating things going on in the aquarium after the main lights go down.
    $39.95
  • Neptune Systems - Optical Level Sensor with Magnetic Mount

    Neptune Systems - Optical Level Sensor with Magnetic Mount

    Neptune Systems - Optical Level Sensor with Magnetic Mount

    This Neptune Systems OS-1-M Optical Level sensor w/ Magnetic Mount plugs into your Neptune Systems FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet. This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in your sump, water storage level sensor, and much more. The sensors can be mounted on any type of reservoir that has up to 1/4" thick walls.

    $34.95
  • Neptune System 1 channel Apex to Stream / 1 channel light dimming cable

    Neptune System 1 channel Apex to Stream / 1 channel light dimming cable

    Neptune System 1 channel Apex to Stream / 1 channel light dimming cable
    $19.95
  • AquaController Jr. / AC III / APEX Temperature Probe by Neptune Systems

    AquaController Jr. / AC III / APEX Temperature Probe by Neptune Systems

    AquaController Jr. / AC III / APEX TemperatureProbe by Neptune Systems...
    (1)
    $29.95
  • Neptune Systems WAV Pump - Controllable Flow Powerhead

    Neptune Systems WAV Pump - Controllable Flow Powerhead

    Neptune Systems WAV Pump - Controllable Flow Powerhead

    The WAV moves water. Plain and simple. More than 4000 gallons per hour of it! Better yet, for the same amount of flow, the WAV is smaller, uses less power, and is quieter than the most popular powerhead pumps on the market.

    A powerhead that answers all your needs:

    • Extreme flow (~4000+ gph)
    • Compact size (less total mass compared to nearly all similar flow pumps)
    • Directional flow (pivots with 40 degree range of motion and can be rotated – great for rear wall use)
    • Safe, 24V DC operation
    • Low power consumption – <35W at the wall
    • Multiple operational modes (random flow modes, mirror, inverse, etc.)
    • Easy to clean (pump automatically shuts off when removed from water)
    • Incredibly Quiet (possibly the quietest driver on the market)
    • Magnetic mount works on up to 1″ glass (in a class by itself)
    • Easy installation with just a single skinny wire for all power and control (1LINK interface makes it a snap!)
    $199.95
  • Neptune Systems I/O Break Out Box

    Neptune Systems I/O Break Out Box

    Easily add float switches, water on the floor sensors, etc. to the APEX, AquaController 3 or AquaController 3 Pro. Simply plug the Breakout box's minidin 8 cable into the AquaController I/O port...
    (5)
    $39.95
  • Neptune Systems 1LINK Power and Communication Module

    Neptune Systems 1LINK Power and Communication Module

    Neptune Systems 1LINK Power and Communication Module

    1LINK™ – Easy, one-click installation

    The WAV is the first of a line of aquarium products from Neptune Systems that will use a completely new interface. While many in the aquarium world continue to embrace wireless technologies for interconnectivity, we have decided to go the other direction – a wire.

    Wireless connectivity from your smartphone or tablet to your Apex (or other controller) is completely logical – and we embrace that. However, wireless used for the interconnecting of devices within the confines of common aquariums (that are mostly less than 6′ long) is not only unnecessary, but it reduces reliability. Our philosophy is that when distances are measured in a few feet, wireless is a solution looking for a problem. And ironically, wireless really does not save wires. You still need to use a wire to get power to the devices anyway. And let’s not forget configuration – wireless devices require syncing, endless button presses and arcane steps to get them to connect up – hopefully with you and not your neighbor. Finally for all this “benefit”, you as the consumer get the added cost of this wireless technology that must be baked into the price of every device you buy.

    So after much study of the problem, our answer is 1LINK. It is called 1LINK because there is one power supply, one module (for up to three 1LINK devices), and a one-click-connection of a wire that carries not only the power for the device, but two-way communication from it to your Apex.  Setup is simply click and go.

    Less wires, less configuration headaches, and best of all, less cost to you as a consumer!

    $149.95
  • Neptune Systems PM2, Conductivity, Temperature, I/O Expansion Box

    Neptune Systems PM2, Conductivity, Temperature, I/O Expansion Box

    Neptune Systems PM2, Conductivity, Temperature, I/O Expansion Box

    The PM2 probe module (shown above) , includes support for conductivity (salinity), temperature, and 6 digital inputs. The PM2 features are:

    * Monitor/Control Conductivity and temperature.
    * 6 digital inputs for float switches, water on floor sensors, pressure sensors, etc.
    * Full datalogging support in Apex Base module.
    * Up to 240 AquaBus modules can be added to the Apex system.
    * Plug and Play. Automatically recognized when installed into the system.
    * Two AquaBus connectors for flexible expansion via AquaBus
    * Comes with 3' AquaBus cable.
    * Galvanic Isolation for accurate and reliable probe readings.
    * Led Status Indicator
    * Upgradeable firmware.
    * Compatible with Apex and Apex Lite systems.

    (2)
    $84.95
  • Neptune Systems Double Junction Lab Grade pH Probe

    Neptune Systems Double Junction Lab Grade pH Probe

    Neptune Systems Double Junction Lab Grade pH Probe

    Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junction to contaminate the electrolyte surrounding the reference electrode.

    What's the difference between double junction and single junction probes?
    Single junction probes put the reference electrode in direct contact with aquarium water. Over time, the junction will slowly leak aquarium water into the electrolyte which changes the accuracy of the probe and requires more frequent calibrations.
     

    Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junction to contaminate the electrolyte surrounding the reference electrode.

    $74.95
  • Neptune Systems 15' AquaBus Extension Cable (Male/ Female)

    Neptune Systems 15' AquaBus Extension Cable (Male/ Female)

    Neptune Systems 15' AquaBus Extension Cable (Male/ Female)...
    $19.95
  • Neptune Systems Flow Monitoring Kit - FMK

    Neptune Systems Flow Monitoring Kit - FMK

    Neptune Systems Flow Monitoring Kit (FMM, (2) FS-50, (4) 1/2" Adapters, (1) FS-100, (2) 1" union

    START MONITORING FLOW IN YOUR AQUARIUM. THIS KIT INCLUDES:

    • FMM - FLUID MONITORING MODULE
    • 1'' FLOW SENSOR (FS-100)
    • TWO 1/2'' FLOW SENSORS (FS-50)
    • TWO 1'' UNIONS
    • FOUR 1/2'' ADAPTERS
    • WORKS WITH ALL APEX MODELS!
    $199.95
  • Neptune Systems Apex Jr. Controller with Temp Probe & Display

    Neptune Systems Apex Jr. Controller with Temp Probe & Display

    Neptune Systems Apex Jr. with Temp Probe & Display

    Apex Jr System

    * The Apex Jr System delivers a professional quality controller at hobbyist prices. 
    * Built-in Ethernet
    * Integrated Ethernet port
    * Most advanced web server available
    * Interactive graphing application in the web server
    * Interfaces with AquaNotes iPhone application
    * Compatible with all Major web browsers (Internet Explorer, Firefox, and Safari)
    * Only aquarium controller with web server monitoring, control, and configuration
    * Compatible with wireless bridges or game adapters (802.11x) so that wireless network communication is possible
    * Email or text message alarms
    * Email alarms or audible alarms when Energy Bar power fails
    * RSS and XML Support

    (4)
    $239.95
  • Neptune Systems Flow Sensor - 1/4" - FS25

    Neptune Systems Flow Sensor - 1/4" - FS25

    Neptune Systems Flow Sensor - 1/4" - FS25

    Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe.

    The flow sensor itself uses push-fit connectors to make connecting to your system as simple as possible.  The FS-25 will work with flow rates from 3-12 gph.

    $19.95
  • Neptune Systems LD2 Leak Detection Probe for solid surfaces

    Neptune Systems LD2 Leak Detection Probe for solid surfaces

    Neptune Systems LD2 Leak Detection Probe for solid surfaces

    Leak Detection Probe for solid surfaces  (LD-2)

    Plug this probe into your FMM and then place it on any surface where you want to detect stray water. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place.  Time is so critical when it comes to water on the floor so it is very common to place two of these inside the stand and two outside the stand to have the ultimate protection against a leaky aquarium.  

    Note: The LD-2 will only work with the FMM and cannot be used with the ALD module.

    $29.95
  • Neptune Systems ALD Advanced Leak Detection Module

    Neptune Systems ALD Advanced Leak Detection Module

    Neptune Systems Advanced Leak Detection ModuleThe DA Float switch kits comes with everything you need to hook up a float switch to your ReefKeeper Elite or ReefKeeper Lite system!
    (5)
    $74.95
  • Neptune Systems Lab Grade ORP probe

    Neptune Systems Lab Grade ORP probe

    Neptune Systems Lab Grade ORP probe

    - ORP precision is 1 mV.
    - Lab grade probe w/ 10' coax cable.
    - Platinum band electrode.
    - Standard BNC Connector

    (2)
    $69.95
  •  Neptune Systems MPR Apex Magnetic Probe Holder

    Neptune Systems MPR Apex Magnetic Probe Holder

    Neptune Apex Magnetic Probe Holder

    The little new product we promised. It may be little, but it has been in demand for a long time. The MPR - Magnetic Probe Rack was designed specifically for the Apex and will hold our larger diameter temperature probe, pH probe, ORP probe, and salinity probe. It's made from acrylic and with strong neodymium magnets it will hold on tight even on sumps that are 1/2" thick!

    (3)
    $39.95
  • Oxyguard Dissolved Oxygen Probe with 10 foot Cable by Neptune Systems

    Oxyguard Dissolved Oxygen Probe with 10 foot Cable by Neptune Systems

    Oxyguard Dissolved Oxygen Probe by Neptune Systems...
    $699.95
  • Neptune Systems PMK PAR Monitoring Kit

    Neptune Systems PMK PAR Monitoring Kit

    Neptune Systems PMK PAR Monitoring Kit

    Features
    Features and Benefits:

    • Performs continuous light-level monitoring for your aquarium
    • Measures actual PAR – the light corals and plants use
    • Prevents burning out corals
    • Includes ASM – the new Advanced Sensors Module
    • PAR sensor hides nicely in aquarium inside Real Reef Rock
    • Fine tune your lighting to your aquariums’s needs
    $299.95
  •  AquaIllumination to VDM Adapter Cable by Neptune Systems

    AquaIllumination to VDM Adapter Cable by Neptune Systems

    Aqua Illuminations to VDMAdapter Cable by NeptuneSystems...
    $17.95
  • Neptune Systems Flow Sensor - 1" with unions - FS100

    Neptune Systems Flow Sensor - 1" with unions - FS100

    Neptune Systems Flow Sensor - 1" with unions - FS100

    Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe.

    The flow sensor itself uses BSPP threads so for North American customers we have included two specially designed PVC unions with slip fittings to adapt it to standard 1″ PVC plumbing.  The FS-100 will work with flow rates from 150-1500 gph.

    (2)
    $59.95
  • Neptune Systems 24VDC 36W Power Supply - PS36

    Neptune Systems 24VDC 36W Power Supply - PS36

    Neptune Systems 24VDC 36W Power Supply - PS36

    This 24VDC, 36W power supply is used with the FMM so that you can attach the powered accessories above like the PMUP or the Solenoid Valve. This power supply is for 110V USA-style  outlets.

    $29.95
  • Neptune Systems Lunar Simulator LEDs (4)

    Neptune Systems Lunar Simulator LEDs (4)

    Neptune Systems Lunar Simulator LEDs (4)Want to more accurately simulate the natural environment for your tank inhabitants?Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Many corals continue to grow under moonlight conditions and for some fish and coral it is important for the reproductive process. Also, night predators come out and cruise, while prey go into hiding.The other benefit of moonlights is that it extends the time you can enjoy your aquarium and in a totally different way. We all like to go to our tank with a flashlight and see whats going on, but it can often startle many creatures and send them into hiding. With a moonlight, your tank has just enough light for you to see many of the fascinating things going on in the aquarium after the main lights go down.
    $49.95
  • LDK Leak Detection Kit - Neptune Systems

    LDK Leak Detection Kit - Neptune Systems

    LDK Leak Detection Kit - Neptune Systems

    Detecting a leak early can be the difference between saving a tank to an entire loss. Neptune's Leak Detection Kit is the perfect solution for anyone that uses an Apex Controller to monitor and control their aquarium. The LDK system will plug right into your current Apex through the Aquabus connections and includes two Leak Detection Sensors. The sensors can be placed in multiple areas around your tank and its equipment. 

    $149.95
  • Neptune Systems AFS Automatic Feeding System

    Neptune Systems AFS Automatic Feeding System

    Neptune Systems AFS Automatic Feeding System

    Great things happen when you combine the functionality of our proven Apex AquaController and the mechanics of a great autofeeding mechanism. It has long been known that feeding smaller amounts, more often, is the most successful way to feed your fish and corals.

    (1)
    $99.95
  • Neptune Systems Lab Grade Conductivity Probe

    Neptune Systems Lab Grade Conductivity Probe

    Neptune Systems Lab Grade Conductivity Probe

    - Dual Range
    - 0 to 999 us/cm or
    - to 99.9 ms/cm
    - Lab quality probe w/10' cable
    - Minidin 4 Connector

    (3)
    $124.95
  • Neptune Systems APEX Aqua Controller BASE UNIT

    Neptune Systems APEX Aqua Controller BASE UNIT

    Neptune Systems APEX Aqua Controller BASE UNIT

    Our flagship aquarium controller

    Our Apex System is the best-value aquarium controller on the market today. Dollar for dollar you will not find a higher-quality controller that gives you more features, is easier to use, or has a larger and more active user base than the Apex.

    Included:

    • Apex Base Unit
    (2)
    $295.00
  • Neptune Systems LSM Lunar Simulator Module

    Neptune Systems LSM Lunar Simulator Module

    Neptune Systems LSM Lunar Simulator Module.

    Want to more accurately simulate the natural environment for your tank inhabitants?

    Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Many corals continue to grow under moonlight conditions and for some fish and coral it is important for the reproductive process. Also, night predators come out and cruise, while prey go into hiding.

    (1)
    $64.95
  • Neptune Systems Apex Aquarium Controller - EB832, Temp Probe, Salinity Probe, Double Junction Lab pH & Lab

    Neptune Systems Apex Aquarium Controller - EB832, Temp Probe, Salinity Probe, Double Junction Lab pH & Lab

    Neptune Systems Apex Aquarium Controller - EB832, Temp Probe, Salinity Probe, Double Junction Lab pH & Lab

    The Neptune Systems Apex Aquarium Controller System includes everything to monitor and control your aquariums from anywhere in the world.  It monitors temperature, ph, orp, salinity along with 8 individual controllable outlets.  

    The Neptune Systems Apex Aquarium Controller System does all the dirty work for your aquarium so you can do more important things like fragging your corals or layng on your couch and enjoying your aquarium. The Apex System has built in Wi-Fi, an incredible 802.11g/n Wi-Fi connection with reliability that rivals a wired connection.  The Apex System comes with all the essentials for monitoring and controlling a reef like controllable power outlets, temperature, pH, ORP, salinity, etc.  What's awesome about the Neptune Systems is that it allows you to monitor and control the conditions of you tank using your laptop, tablet, or mobile phone.You don't have to go to your aquarium to check the conditions of your tank anymore. Everything can be monitored and controlled from the touch of your phone. Talk about convenience!

    The Energy Bar 832 was redesigned from the ground up and includes eight 120V AC outlets, an internal 100W 24VDC power supply, three built-in 1LINK ports and two 24VDC accessory ports. Each individual outlet has power monitoring and there are individual LED indicators for each outlet.

    (8)
    $799.95
  • Neptune Systems PM3, Dissolved Oxygen, Temperature, I/O Expansion Box

    Neptune Systems PM3, Dissolved Oxygen, Temperature, I/O Expansion Box

    Neptune Systems PM3, Dissolved Oxygen, Temperature, I/O Expansion Box.

    The PM3 probe module (shown above) , includes support for dissolved oxygen, temperature, and 6 digital inputs. The PM3 features are:

    * Monitor/Control Dissolved and temperature.
    * 6 digital inputs for float switches, water on floor sensors, pressure sensors, etc.
    * Full datalogging support in Apex Base module.
    * Up to 240 AquaBus modules can be added to the Apex system.
    * Plug and Play. Automatically recognized when installed into the system.
    * Two AquaBus connectors for flexible expansion via AquaBus
    * Comes with 3' AquaBus cable.
    * Galvanic Isolation for accurate and reliable probe readings.
    * Led Status Indicator
    * Upgradeable firmware.
    * Compatible with Apex and Apex Lite systems.

    $94.95
  • Neptune Systems Double Junction Lab Grade ORP Probe

    Neptune Systems Double Junction Lab Grade ORP Probe

    Neptune Systems Double Junction Lab Grade ORP Probe

    Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junction to contaminate the electrolyte surrounding the reference electrode.

    What's the difference between double junction and single junction probes?
    Single junction probes put the reference electrode in direct contact with aquarium water. Over time, the junction will slowly leak aquarium water into the electrolyte which changes the accuracy of the probe and requires more frequent calibrations.
     

    Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junction to contaminate the electrolyte surrounding the reference electrode.

    $84.95

Items 1 to 36 of 63 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  Loading...