How does a Calcium Reactor work?
All hard corals and clams requires calcium and alkalinity in order to grow and be healthy. Calcium Reactors add Calcium and Alkalinity reliably and consistantly, with little to no work needed by the aquarists. These systems are a mainstay of serious coral keepers. A calcium reactor consists of a media chamber, with specilized fittings, allowing the water to be recirculated within the reactor, while adding a small, meausred amount of tank water into the reactor, and then out of the reactor. Carbon Dioxide is added to the reactor (also through a specialized fitting and setup) to dissolve the calcium based media, and allow the return water to be rich in calcium and alkalinity, for you aquarium inhabitants. Once etsablished and properly set up, this system will suitably, efficiently, and reliably add calcium and alkalinity to the tank, enabling the tanks inhabitants to flourish.
Why should you buy a MRC calcium reactor?
What seems like a large intial expense, is ultimately a money saver. Other methods of clacium and alkalinity replenishment require constant aquarist labor, and constant renewal of supplies, all at a substantial ongoing cost. Whereas, with MRC calcium reactors, you will only need to replace the reactor media as needed (approximately every 6 months to one year) at a minimal cost, as well as replacing the carbon dioxide bottle as needed (also approximately every 6 months to one year, depending on setup). MRC calcium reactors use a very specialized and magnificent feature: the MRC “Spray Bar” technology to most efficiently and properly use the media in the reactor. The MRC Spray Bar Technology ensures an even dissolution of media throughout the entire media chamber. It also allows you to use the best fine media giving youmore surface area to work with; coarse media supplies only a fraction of the surface area as the fine, essentially making your reactor a fraction of the size. The MRC Spray Bar Technology combined with MRC rock-solid craftsmanship, materials, and support, makes the MRC calcium Reactor stand out well above the competition.
Calcium Reactors have become a standard piece of equipment for nearly all serious coral keepers. The ability to supply calcium and alkalinity with no significant effort or concern from the aquarist and requiring very little operating cost once set up is something that simply can’t be beat. MRC calcium reactors offer a step up with the MRC spray bar technology to maximize performance and efficiency of your reactor to unsurpassed levels.
We offer two “stages” of reactor: our single chambered CR-1 and our dual chambered CR-2 to CR-6. However, with any Calcium reactor, should an additional chamber be needed, they are available to increase the effluent buffering capacity and dissolution in any of our reactors or for any brand reactor for that matter.
All Calcium reactors include the MRC spray bar system, ph probe holder and hose feed line.
Up to 725 Gallons
The most efficient and advanced Calcium Reactor on the market. Easy to operate for optimal results.
MRC Spray Bar Upgrade.Revolutionary spray bar design that mixes the CO2 with the media in a more uniform pattern. The spray bar allows a full concentration of CO2 to penetrate the entire chamber of media allowing for low CO2 consumption and maximum output. Requires Blue Line 20 HD.
Ph Probe Holder & MRC Spray Bar included
|Height of reactor ||21" |
|Reactor Chamber Diameter OD ||6" & 4 1/2" |
|Reactor Chamber Thickness ||1/4" |
|Foot Print ||14" x 14" |
|Water inlet size ||1/2" Nylon Barb |
|Water Outlet size ||1/4" John Guest Speedfit |
|Method of feeding ||Gravity or Pump/powerhead |
|System capabilities ||725 gallons |
|Needle Valve for effluent control ||Standard |
|Water Pump ||Not Inluded - BL 20 |
|Chamber Capacity ||18 pounds |
|Necessary parts |
CO2 regulator, CO2 Tank, Feed pump, BL-20, Media