SKIMZ Singapore LLP begun in early 2000. We focused our initial years in aggressive product research and development, with the aim of bringing the best possible marine equipments to professionals and hobbyists. Today, we carry the widest range of outstanding equipments to suit your needs. We even customized a whole range of equipments for aquaculture farms and the marine industry. SKIMZ uses the best material and latest technology in the manufacturing of our equipments. The result: We bring to you equipments of the finest quality! All SKIMZ protein skimmers undergo the prestigious TÜV Rheinland testing, a testimony of our quality products meeting the highest technical requirements. SKIMZ strives for continual improvements to our products. Lots of useful information are available on our website. If you require further information on SKIMZ products, please feel free to contact us using the enquiry forms. We would love to hear from you.
- Aquarium Air Valves and Fittings
- Coral Frag Plugs and Frag Holders
- Dosing Accessories
- Dosing Line Holders
- Skimz iBOX Nano Aquariums
- SKIMZ Monzter Calcium Reactors
- CO2 Tubing and Accessories
- Calcium Reactors
- Aqua Medic Aquarium Dosing Pumps & Top-offs
- Aquarium Dosing Containers
- Bubble Magus Aquarium Dosing Pumps
- Dosing Tube Holders
- Eshopps Aquarium Dosing Pumps
- GHL ProfiLux Aquarium Dosing Pumps
- Precision Aquarium Dosing Pumps
- Vertex Libra Aquarium Dosing Pumps
- BioPellets Nitrate Removal Media
- Carbon and Chemical Aquarium Filtration Media
- GFO Phosphate Removal Media
- SKIMZ Fluidized Media Reactors
- Nitrate Reactors
- Aquarium Feeding Tools & Accessories
- Eden Needle Wheel Pumps for Skimz Protein Skimmers
- Skimz DC Pin Wheel Skimmer Pumps
- SKIMZ Kone E-Series Protein Skimmers
- SKIMZ Leopard D-Series Protein Skimmers
- SKIMZ Monzter DC-Series Protein Skimmers
- SKIMZ Monzter E-Series Protein Skimmers
- Skimz Oval D-Series Protein Skimmers
- Featured Products
- SKIMZ H-Series Protein Skimmers
- Milwaukee Dosing Pumps
- New Products
- SKIMZ Bio-Pellets Reactors
Replacement BEARING for Skimz Eden ES2800/ES5000 Pin-Wheel Impellers.$7.95
Skimz PUR Carbon
Skimz PurCarbon is a high performance activated carbon with superior pore space, ideally suited to remove dissolved organic waste, foul odours, toxins and water discoloration (yellow tint) from the water leaving your aquarium crystal clear. It permits maximum penetration of light which help to improve the health of your corals.
Rinse well before use. Place in a fine mesh bag within the aquarium filter in water flow. It can be used in fluidised reactors having low water flow. Use 100 ml for 200 liters (50 gal.) of aquarium water.
Starting at: $8.95
Skimz Coral Feeders, 2 Pack, 16" & 24"
Skimz Coral Feeder is the perfect tool for feeding foods to hard corals, soft corals or small fish. When it comes to feeding corals with very small mouths, like leathers or SPS corals, there are food additives you can add to the water and spot feed.
Corals can do well without being feed when provided with the proper environment within an old or mature set-up. Usually feeding corals will accelerate their growth and enhance the colours.$14.95
Skimz DT4 Dosing Tube Holder
Skimz DT4 is Tube Holder clamp with four holes for holdIng tubes of the dosing pump in place on the side of the tank or sump in position.
- Heavy duty bracket
- Hold up to 4 dosing tubes
- Dimensions: L90 X D53 X H55mm
- Max glass thickness: 19mm$16.95
Skimz PUR Phos4 GFO Media
Skimz PurPhos is a specially manufactured Phosphate Adsorption media (PAM) which was developed for the removal of phosphate (PO4), the main cause of algae problem. PurPhos has an extra longlife, the media last a lot longer than other conventional PAM due to their high capacity.
Use 100ml PurPhos for every 50 gal of saltwater or 100 gal. of freshwater. Rinse the media briefly in freshwater to remove any dust before use. Replace PurPhos every 3 to 6 months depending on the initial phosphate concentration and level of feeding.
Starting at: $17.95
Pin Wheel Impeller for Skimz DC-3000 Pin Wheel Water Pump (PWI VSC 3000 DC)$23.95
Out of stock
EDEN ES2000 Needle Wheel Impeller$29.95
Skimz Frag Holding Tray, Holds 16 plugs hole (20 Plugs Included)
Skimz CR16 Coral Frag Rack is just what you need to cultivate and grow of hard and soft corals such as acropora, xenia, zoas, etc. It's cast arcylic structure attaches to the side of the aquarium with secure magnets. Each hole securely fits a Skimz coral frag plug.
- Straight coral rack 250 x 105 mm
- Hold 16 plugs
- Strong neodymium magnets
- Made of cast acrylic
- Comes with 20 free plugs$29.95
Skimz PurBio Biopellet Media
Skimz PurBio is a biodegradable polymer which provides a food source to beneficial bacteria that eliminate unwanted nitrate and phosphate in your aquarium. For best performance, we advise that you use PurBio in BioReactor which will keep the polymers in constant motion and prevent clumping. Direct the output of reactor toward the intake of the protein skimmer to aid the bacterial removal process.
Use 100ml per 25 gal. of water volume. Aquarium with high Nitrate (40ppm+) should start off slowly with 1/3 dosage, and may experience a short period of water cloudiness.
Starting at: $29.95
Pin Wheel Impeller for Skimz DC-5000 Pin Wheel Water Pump (PWI VSC 5000 DC)$39.95
Pin Wheel Impeller for Skimz DC-10000 Pin Wheel Water Pump (PWI VSC 10000 DC)$47.95
EDEN ES2800 Needle Wheel Impeller.$87.95
Out of stock
Eshopps Dosing Container 2.0, 2 x 2 liter Chambers
Skimz DB4 is space-saving liquid storage containers that connect to your dosing pump so you can automate additives and keep your aquarium water parameters stable. You can use DB4 to dose 2-part calcium/alkalinity, trace elements, magnesium, strontium, etc.
- Space saving design
- Easily store and connects to your dosing pump
- With 4 x 1.5L containers
- Made of cast acrylic
- Dimensions: L235 x D152 x H310mm (9" x 6" x 12.25")
- No more mess and poking holes in the top of your additive containers
Eden ES2000 Needle Wheel Pump for Skimz Protein Skimmers$99.95
Skimz DC-3000 Pin Wheel Water Pump (VSC3000-DC).
* Skimmer pump: Controlable Skimz VSC-3000-DC (6 settings)
* Power consumption: 9W - 19W
* Air intake: 600 - 1,200 l/h$101.95
Out of stock
EDEN ES5000 Needle Wheel Impeller.$109.95
Out of stock
Skimz SH1 Protein Skimmer
Skimz SH1 Protein Skimmer is a magnetic mount nano skimmer for aquariums up to 55 gallons. Skimz SH1 features a magnetic mount that allows adjustable positioning and sliding collection cup for perfect setting. SH1 can also be installed right in the aquarium or filter chamber of many all-in-one style aquariums.$119.95
Eden E-Series E-2000 Pump for Skimz Calcium Reactors$129.95
SKIMZ FM 100 Monzter E-Series Fluidized Media Reactor
The FM100 has a reactor chamber diameter of 100mm and is ideal for aquariums up to 600 litres. The FM100 can be used in-sump or out-sump.
The FM100 should be provided with water from the aquarium using separate feed pump.
* Method of feeding: Pump (sold separately)
* Feed rate: 600 – 1000 l/h (160-266 gph)
* Media: 200 – 400g of AquaPharm SORB-4
* 400 – 800ml of Skimz media 4 or other media$139.95
Skimz SH2 Protein Skimmer Skimz
SH2 Protein Skimmer is a nano skimmer designed to hang on the back of aquarium or sump. Skimz SH2 require a small pump to drive the water flow into the skimmer. SH2 features a sliding collection cup by adjusting the o-ring for perfect setting.
SH2 is a true nano skimmer aimed at smaller aquariums and it will keep that water clean.$139.95
Skimz DC-5000 Pin Wheel Water Pump (VSC5000-DC)$149.95
Eden ES2800 Needle Wheel Pump for Skimz Protein Skimmers
Max air flow: 1020 L/H
115V / 60Hz 13W$149.95
Out of stock
SKIMZ FM 150 MONZTER SERIES - FLUIDIZED MEDIA REACTOR
The FM150 has a reactor chamber diameter of 6"and is ideal for aquariums up to 600 litres. The FM100 can be used in-sump or out-sump.$159.95
Skimz BR83 Bio-Pellet Reactor with DC Pump
The Skimz BR83 is fitted with a VSC1200-DC (1,200 l/h) pump that lets you control the flowrate using the variable speed controller and can hold up to 400ml of media. The BR83’s bracket can be used as a hang-on or attach horizontally to the brace of the tank. The bracket will fit up to 19mm thick glass or acrylic. Fine media sponges included for use with carbon and GFO media.$159.95