Spectra Pure MaxCap® 90-GPD 5-Stage RO/DI System -with- Manual Membrane Flush MC-RODI-90-10-MF
Incredible break-through in DI cartridge technology will reduce your costs to produce DI water by over 50%.
SpectraPure® MAXCAP® RO/DI™ Systems incorporate our SpectraPure Membrane that produces 90 GPD. It also has the highest rejection rate available at 98% average (minimum 96%) @ 60 psi & 77 degF. Used in combination with our MAXCAP® DI™ and silica-removal Silica-Buster™ deionizing cartridges, this system provides the ultimate removal of algae promoting substances, including colloidal silica, and the longest deionizing cartridge life, significantly reducing the cost of operation. This is water purification at its best, an RO/DI system designed to continuously produce economical ultra-pure water.
This super-capacity DI system consists of a newly developed MAXCAP® DI™ Cartridge, with over three times as much contaminate removal capacity as any other Mixed-Bed DI cartridge. The final stage consists of our SilicaBuster™ DI cartridge, with two, dual inline electronic purity monitors to determine the performance of the RO membrane as well as the DI exhaustion points. While competitors claim ZERO TDS, don't be fooled by limitations of most inexpensive DI Systems. Besides, it just makes sense. Two stages of high quality DI cartridges will definitely produce higher-purity water more reliably over the life of the cartridges than any single stage.
The MAXCAP® RO/DI™ is available with either one 90 GPD membrane or two membranes for 180 gallons per day.
MAXCAP® RO/DI™ Systems are equipped with the finest pre-filtration 0.5 micron MicroTec™ pre-filters, and 20,000 ppm-gallon chlorine/chloramine capacity 0.5 micron carbon block pre-filters. Clear filter housings and a standard pressure gauge provide better monitoring of system performance. No more guessing about plugged pre-filters. Also included is a filter wrench and a 3/4" garden hose adapter.
Our premium grade filters (as used in the MAXCAP® RO/DI™) are a significant upgrade in performance and capacity. Each of our premium grade filters has been extensively tested in the worst-case locations to insure performance, capacity, and reliability. If you have excellent tap water (a rarity these days, but it still happens in some places in the US ), you may be able to scrimp on pre-filtration, but we see that as the exception in most locations, and thus recommend you purchase the best pre-filtration you can afford. As important as pre-filtration is to removal of contaminants and the life of your expensive RO membrane (and subsequently the life of your DI cartridges), we think that for ultimate performance and lowest cost of ownership over the production life of your membrane that you should always use the best pre-filtration available.
• Ultra-high purity water (18 megohm-cm resistivity)
• SpectraPure Membranes have 98%+ rejection - extends DI cartridge life.
- Produces 90 or 180 Gallons Per Day
• New super-capacity 2-stage de ionizer
• The best pre-filtration available:
- High-efficiency 0.5 Micron Sediment Filter.
- ½ micron carbon block pre-filter (20,000 gallon chlorine removal capacity)
• Effective on well water and colloidal silica
• Clear housings and pressure gauge
• (2) Dual T.D.S Meters for accurate monitor
• Pressure gauge and (2) dual TDS meters
• Filter wrench and garden hose adapter
• Dimensions: 20” x 7” x 16”
Questions on Spectra Pure MaxCap 90-GPD 5-Stage RO/DI System -with- Manual Membrane Flush MC-RODI-90-10-MF
No questions asked yet