847-775-0640 Call us M-F 9-5:30 CST

Sweetwater

Sweetwater

Brand categories

Items 1 to 24 of 63 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  • Replacement Vane Set for AQ9 and AQ93 Sweetwater Rotary Vane Compressors

    Replacement Vane Set for AQ9 and AQ93 Sweetwater Rotary Vane Compressors

    Replacement Vane Set for AQ9 and AQ93 Sweetwater Rotary Vane Compressors

    We recommends carbon vane replacement at nine-month intervals to ensure trouble-free operation of your compressor.

    $229.95
  • Pressure Relief Valve Assembly

    Pressure Relief Valve Assembly

    • Pressure Relief Valve Assembly, 2" for S45, S453, S51, S553, SD5
    • Pressure Relief Valve Assembly, 3" for S61, S63, S631, S651, S653, S56, S69, S73, S15, SD6, SD69 (3" NPT)

    Designed for low-pressure blowers, these valves will automatically protect blowers from over-pressurization by discharging air to the outside. The valve assembly is easy to install and calibrate. Pressure relief valves can be noisy when dumping air, so add a muffler assembly and steel coupler (not included) if you plan to use it as a normally open bleed valve. Both sides are FNTP. One-year warranty.

    Starting at: $246.95

  •  S11 Sweetwater Regenerative Blower 1/8HP

    S11 Sweetwater Regenerative Blower 1/8HP

    S11 Sweetwater Regenerative Blower 1/8HP

    Sweetwater regenerative blowers are manufactured to AES Aquaculture Duty Specifications. Sweetwater blowers reach higher pressures, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers.

    Sweetwater regenerative blowers are most often chosen by professionals in the aquaculture industry because of their reliability. They are inexpensive to operate, and the air they deliver is oil-free. They are extremely energy efficient and quiet.

    Sweetwater® blowers are simple. And simplicity means reliability. They have only one moving part: a dynamically balanced impeller that is attached directly to the motor shaft. The rotating impeller doesn't touch a thing, so there's no wear, no vibration, no seals and no lubrication. Just wash the inlet air filters as needed and replace the motor bearings after three years of continuous operation. 

    Optional Inlet & Outlet Kits:

    • Inlet Kits include air filter, PVC elbow, bushing nipple and pipe.
    • Outlet Kits include PVC nipple, stainless steel clamps and 6" outlet hose.
    • 115V models include power cord.



    S11 Specifications:

    • 1/8 hp
    • 34" max duty
    • Single Phase
    $424.95
  •  S21 Sweetwater Regenerative Blower 1/3HP

    S21 Sweetwater Regenerative Blower 1/3HP

    S21 Sweetwater Regenerative Blower 1/3HP. 

    Sweetwater regenerative blowers are manufactured to AES Aquaculture Duty Specifications. Sweetwater blowers reach higher pressures, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers.

    Sweetwater regenerative blowers are most often chosen by professionals in the aquaculture industry because of their reliability. They are inexpensive to operate, and the air they deliver is oil-free. They are extremely energy efficient and quiet.

    Optional Inlet & Outlet Kits:

    • Inlet Kits include air filter, PVC elbow, bushing nipple and pipe.
    • Outlet Kits include PVC nipple, stainless steel clamps and 6" outlet hose.
    • 115V models include power cord.

     

    S21 Specifications:

    • 1/3 hp
    • 43" max duty
    • Single Phase
    $489.95
  • SST10 Sweetwater Series 2 Regenerative Blower 0.3HP

    SST10 Sweetwater Series 2 Regenerative Blower 0.3HP

    SST10 Sweetwater Series 2 Regenerative Blower 0.3HP

    These regenerative vacuum, pressure blowers are ideal alternatives to standard rotary vane pumps and positive displacement, rotary lobe blowers. Their rugged die-cast aluminum build is lightweight, compact and super-quiet.

    Easy-to-install, close-coupled construction means you can quickly add them to your system. The cool-running outboard bearings increase service life. Oilless and virtually maintenance-free. CE- and UL-listed TEFC motors. 115V and 230V models are 50/60 Hz. Three-year warranty.

    Note: SST30 requires a minimum 20-amp receptacle (pulls 14 A when running).

    3-Phase Equipment

    We highly recommend using protective devices with all 3-phase equipment. Motor starters, phase monitors and phase protectors are not included in the sale and should be sourced locally. Failure to install protective devices will void most warranties. We also recommend that a certified electrician perform the installation.

    SST10 Specifications:

    * 0.3 hp
    * 30 cfm
    * 115V / 230V, 1-Phase

    $489.95
  • S31 Sweetwater Regenerative Blower 1/2HP

    S31 Sweetwater Regenerative Blower 1/2HP

    S31 Sweetwater Regenerative Blower 1/2HP

    Sweetwater regenerative blowers are manufactured to AES Aquaculture Duty Specifications. Sweetwater blowers reach higher pressures, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers.

    Sweetwater regenerative blowers are most often chosen by professionals in the aquaculture industry because of their reliability. They are inexpensive to operate, and the air they deliver is oil-free. They are extremely energy efficient and quiet.

    Optional Inlet & Outlet Kits:

    • Inlet Kits include air filter, PVC elbow, bushing nipple and pipe.
    • Outlet Kits include PVC nipple, stainless steel clamps and 6" outlet hose.
    • 115V models include power cord.

     

    S31 Specifications:

    • 1/2 hp
    • 56" max duty
    • Single Phase
    (1)
    $519.95
  • SST15 Sweetwater Series 2 Regenerative Blower 0.6HP

    SST15 Sweetwater Series 2 Regenerative Blower 0.6HP

    SST15 Sweetwater Series 2 Regenerative Blower 0.6HP

    Sweetwater® Series 2 regenerative blowers operate at a higher efficiency than traditional regenerative blowers. The cool-running outboard bearing design allows these units to achieve higher differential pressures, provide more cfm per horsepower and extend service life. The rugged die-cast aluminum build is lightweight, compact and extremely quiet.

    These regenerative vacuum, pressure blowers are ideal alternatives to standard rotary vane pumps and positive displacement, rotary lobe blowers. Their rugged die-cast aluminum build is lightweight, compact and super-quiet.

    Easy-to-install, close-coupled construction means you can quickly add them to your system. The cool-running outboard bearings increase service life. Oilless and virtually maintenance-free. CE- and UL-listed TEFC motors. 115V and 230V models are 50/60 Hz. Three-year warranty.

    Note: SST30 requires a minimum 20-amp receptacle (pulls 14 A when running).

    3-Phase Equipment

    We highly recommend using protective devices with all 3-phase equipment. Motor starters, phase monitors and phase protectors are not included in the sale and should be sourced locally. Failure to install protective devices will void most warranties. We also recommend that a certified electrician perform the installation.

    SST15 Specifications:
    0.6 hp
    60 cfm
    Available: 115V / 230V, 1 Phase

    $539.95
  • S313 Sweetwater Regenerative Blower 1/2HP

    S313 Sweetwater Regenerative Blower 1/2HP

    S313 Sweetwater Regenerative Blower 1/2HP

    Sweetwater regenerative blowers are manufactured to AES Aquaculture Duty Specifications. Sweetwater blowers reach higher pressures, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers.

    Sweetwater regenerative blowers are most often chosen by professionals in the aquaculture industry because of their reliability. They are inexpensive to operate, and the air they deliver is oil-free. They are extremely energy efficient and quiet.

    Sweetwater® blowers are simple. And simplicity means reliability. They have only one moving part: a dynamically balanced impeller that is attached directly to the motor shaft. The rotating impeller doesn't touch a thing, so there's no wear, no vibration, no seals and no lubrication. Just wash the inlet air filters as needed and replace the motor bearings after three years of continuous operation. 

    Optional Inlet & Outlet Kits:

    • Inlet Kits include air filter, PVC elbow, bushing nipple and pipe.
    • Outlet Kits include PVC nipple, stainless steel clamps and 6" outlet hose.



    S313 Specifications:

    • 1/2 hp
    • 56" max duty
    • 230/460V - 3 Phase
    $569.95
  • Sweetwater Rotary Vane Compressor, AQ3-2, 1/4 HP

    Sweetwater Rotary Vane Compressor, AQ3-2, 1/4 HP

    Sweetwater Rotary Vane Compressor, AQ3-2, 1/4 HP

    he Pentair Aquatic Eco-Systems Sweetwater® motor-mounted, oilless vane compressors are compact, easy-to-service and excellent for moderate pressure, continuous-duty applications. They more than double the air output of reciprocating compressors with better longevity. Sacrificial oilless carbon vanes automatically adjust as they wear to maintain efficiency.

    Thermal overload protection, air filter, inlet check valve and 8' power cord are included on single-phase units. Ten-psi models work to a water depth of 18 feet and 15-psi models work to 27 feet, depending on tubing diameter and distance.The only wearing parts are carbon vanes, which can be replaced in about 15 minutes using common tools. In continuous operation, vanes last 9–18 months, depending on pressure.

    $629.95
  • S41 Sweetwater Regenerative Blower 1HP

    S41 Sweetwater Regenerative Blower 1HP

    S41 Sweetwater Regenerative Blower 1HP

    Sweetwater regenerative blowers are manufactured to AES Aquaculture Duty Specifications. Sweetwater blowers reach higher pressures, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers.

    Sweetwater regenerative blowers are most often chosen by professionals in the aquaculture industry because of their reliability. They are inexpensive to operate, and the air they deliver is oil-free. They are extremely energy efficient and quiet.

    Optional Inlet & Outlet Kits:

    • Inlet Kits include air filter, PVC elbow, bushing nipple and pipe.
    • Outlet Kits include PVC nipple, stainless steel clamps and 6" outlet hose.
    • 115V models include power cord.



    S41 Specifications:

    • 1 hp
    • 58" max duty
    • Single Phase
    (2)
    $669.95
  • SST20 Sweetwater Series 2 Regenerative Blower 0.6HP, 3-Phase

    SST20 Sweetwater Series 2 Regenerative Blower 0.6HP, 3-Phase

    SST20 Sweetwater Series 2 Regenerative Blower 0.6HP

    Sweetwater® Series 2 regenerative blowers operate at a higher efficiency than traditional regenerative blowers. The cool-running outboard bearing design allows these units to achieve higher differential pressures, provide more cfm per horsepower and extend service life. The rugged die-cast aluminum build is lightweight, compact and extremely quiet.

    These regenerative vacuum, pressure blowers are ideal alternatives to standard rotary vane pumps and positive displacement, rotary lobe blowers. Their rugged die-cast aluminum build is lightweight, compact and super-quiet.

    SST20 Specifications:

    • 1.1 hp
    • 75 cfm
    • Available:230/460V, 3-Phase
    $669.95
  • S43 Sweetwater Regenerative Blower 1HP, 3-Phase

    S43 Sweetwater Regenerative Blower 1HP, 3-Phase

    S43 Sweetwater Regenerative Blower 1HP, 3-Phase

    Sweetwater regenerative blowers are manufactured to AES Aquaculture Duty Specifications. Sweetwater blowers reach higher pressures, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers.

    Sweetwater regenerative blowers are most often chosen by professionals in the aquaculture industry because of their reliability. They are inexpensive to operate, and the air they deliver is oil-free. They are extremely energy efficient and quiet.

    Sweetwater® blowers are simple. And simplicity means reliability. They have only one moving part: a dynamically balanced impeller that is attached directly to the motor shaft. The rotating impeller doesn't touch a thing, so there's no wear, no vibration, no seals and no lubrication. Just wash the inlet air filters as needed and replace the motor bearings after three years of continuous operation. 

    All Sweetwater® blowers come with internal mufflers and low-restriction, washable inlet filters as standard equipment. Outlet flex hoses, which simplify installation, are also standard equipment. 

    Optional Inlet & Outlet Kits:

    • Inlet Kits include air filter, PVC elbow, bushing nipple and pipe.
    • Outlet Kits include PVC nipple, stainless steel clamps and 6" outlet hose.


    S43 Specifications:

    • 1 HP
    • 58" max duty
    •  230V/460V, 3-Phase
    • Running Watts: 860W @ 40"
    $689.95

Items 1 to 24 of 63 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  Loading...