|
|
|
|
|
|
|
|
 |
Water level regulator with two sensor holding devices, extension and numerous fastening accessories. It is suitable for use in cabinet filter plants, in Comline filters or on the edge of the aquarium.
This osmotic regulator can also be used in TUNZE SYSTEM cabinet filter plants.
The sensors can be stuck to glass surfaces or can be fitted directly to the edge of the tank.
Delivery condition: Ready for mounting with power supply unit, metering pump, hose, sensor holding device.
The precise water level is ensured by a non-wearing optical sensor and a transistor switch without any moving parts. This sensor is insensitive to soiling, light or magnetic fields.
Its “automatic eye” recognises the water level precisely, even small waves or level variations cannot irritate the unit.
An independent safety sensor with a separate power supply circuit and relay control ensures reliable overflow protection.
An electronic time controller and current limiter for the pump connected result in a higher operational safety. This unit protects the metering pump against running dry and reports an empty storage container.
All functions are clearly displayed by LEDs; safety messages are also indicated by acoustic signals.
The osmotic regulators are all operated at safety extra-low voltage.
Metering pump capacity:
@ 0.9 m (35.4 in.): 52 l/h (13.7 US gal./h)
@ 1.5 m (59 in.): 47 l/h (12.4 US gal./h)
@ 2 m (78.7 in.): 27 l/h (7.1 US gal./h)
Hmax: 2.2 m (86.6 in.).
|
 |
| 1 Customer Review |
| 5 Star: |
 |
0 |
Average Customer Rating
 4.0
out of 5 100% recommend it to
friends
|
| 4 Star: |
|
1 |
| 3 Star: |
|
0 |
| 2 Star: |
|
0 |
| 1 Star: |
|
0 |
|
|
|
I great product
by
Brian
from
NY State
on
8/5/2009
Recommends it to Friends:
Yes
It works well however the Tunze mounting brackets are poorly designed once you figure them out it is a simple install.
Was this review helpful to you? YES /
NO
|
|
|
|
|