847-775-0640 Call us M-F 9-5:30 CST

Tunze Turbelle MasterStream 6580

Product code: 2325
WP-TS6580

Be the first to review this product

Availability: Usually Ships within 24 Hours

$3,684.95
Reward Points Policy Earn 184,247 AQUAPOINTS
OR

Tunze Turbelle MasterStream 6580

The Turbelle® masterstream pumps are intended for the high-performance propeller pump market segment, and primarily predetermined for an implementation in experience zoos, research institutes, rehabilitation clinics and fish or algae farms. We also offer a version for aquarists who operate large aquariums and require a strong as well as wide flow rate for their reef tanks. Turbelle® masterstream pumps are designed to provide a maximum degree of efficiency, combined with a low energy consumption. Thanks to the extra-low safety voltage of the new electronic TUNZE® PM motor, the pumps will operate at a pleasant noise level even at peak performance, compared to conventional water pumps.

Controllable performance

The Turbelle® masterstream are electronically speed-controlled pumps operating on safety extra-low voltage of 12 to 24 V. They can be used ideally for water circulation, wave action or wave-and-tide simulations.

A 12 V version for swimming pools

Model 6560 in 12 V technology and a flow rate of 60,000 l/h (15,850 USgal./h) has been designed especially for swimming pools or large aquariums.

100% corrosion-resistant

All parts of the pumps are made of ASA, POM and adjuvant enriched PA6.6. PU coated cable; the motor axle is made of titanium alloy; the motor and the electronics are cast in polyurethane (PU) resin.

Tunze Turbelle MasterStream 6580

The Turbelle® masterstream pumps are intended for the high-performance propeller pump market segment, and primarily predetermined for an implementation in experience zoos, research institutes, rehabilitation clinics and fish or algae farms. We also offer a version for aquarists who operate large aquariums and require a strong as well as wide flow rate for their reef tanks. Turbelle® masterstream pumps are designed to provide a maximum degree of efficiency, combined with a low energy consumption. Thanks to the extra-low safety voltage of the new electronic TUNZE® PM motor, the pumps will operate at a pleasant noise level even at peak performance, compared to conventional water pumps.

Controllable performance

The Turbelle® masterstream are electronically speed-controlled pumps operating on safety extra-low voltage of 12 to 24 V. They can be used ideally for water circulation, wave action or wave-and-tide simulations.

A 12 V version for swimming pools

Model 6560 in 12 V technology and a flow rate of 60,000 l/h (15,850 USgal./h) has been designed especially for swimming pools or large aquariums.

100% corrosion-resistant

All parts of the pumps are made of ASA, POM and adjuvant enriched PA6.6. PU coated cable; the motor axle is made of titanium alloy; the motor and the electronics are cast in polyurethane (PU) resin.

No external control

The pump control is integrated completely in the motor block ensuring a low-maintenance operation with high efficiency and ideal water cooling. All Turbelle® masterstream pumps only require one external power supply unit or safety connector with a corresponding direct-current source (battery, solar cell, et cetera).

No problem in case of power failure

Fitted with Safety Connector 6515.500, Turbelle® masterstream can be operated on every 11 to 24 V direct- current source (battery, solar cell). The safety connector permits normal operation with the TUNZE® power supply unit, but in case of a power failure it will automatically switch over to a battery or a direct-current source.

Eco-energetic

A small sample calculation using Turbelle® masterstream 6580 (80 m3/h (21 USgal./h) – 420 W) reveals that energy efficient water movement results in enormous cost effectiveness:

Tank volume: 60 m3 (15.9 USgal.3), flow selection by centrifugal pump (32 m3/h (8.5 USgal.) – 2,200 W). Atan annual operating time of 8,760 hours and a kilowatt price of $ 0.30 this results in a cost saving of about$ 4,625 per annum.

Turbelle® masterstream 6560

  • for aquariums >20,000 liters (5,250 USgal.)
  • Flow rate: 45,000 to approx. 80,000 l/h
  • (11,900 to approx. 21,000 USgal./h)
  • Flow velocity: 1.1 - 2.0 m/s (43.3 - 78.7 in./sec.)
  • Energy consumption: 290-420 W
  • Power supply unit: 100-240V / 50-60Hz / 12V DC
  • Cable length: 10 m (393.6 in.)
  • Dimensions (L x W x H):
  • 340 x 165 x 227 mm (13.4 x 6.5 x 8.9 in.)
  • Output: ø125 mm (4.9 in.)
  • Attachment to pipe, ø32 mm (1.3 in.)
  • Supplied with Wavecontroller 7092

Questions on Tunze Turbelle MasterStream 6580

No questions asked yet

Ask Your Own Question









Write Your Own Review

You're reviewing: Tunze Turbelle MasterStream 6580

How do you rate this product? *

Product Rating: 1 stars 2 stars 3 stars 4 stars 5 stars
3,684.95 In stock
  Loading...