|
|
Frequently bought together
1" Bulkheads, sch. 40
1" Tank Addapters.
Require 1 3/4" diameter hole.
**** Use with 45mm, 1.75" Diamond Coated Glass Drill Bit / Hole Saw****
1" Bulkheads, sch. 40
1" Tank Addapters.
Require 1 3/4" diameter hole.
**** Use with 45mm, 1.75" Diamond Coated Glass Drill Bit / Hole Saw****
Questions on 1" Bulkheads, sch. 40
- From Brian at 12/14/2017 8:39 PM
- From Stijn Kriekels at
5/5/2018 1:58 AM
- hi, fits the loc line 1/2 "LOC-LINE NPT CONNECTOR into the 1" Bulkhead, sch. 40, Thread x Slip?
- Stijn,
You will have to use 1" to 1/2" reducer bushing. Here is the link: http://www.aquacave.com/pvc-reducer-bushing-mpt-x-ftp.html
- Do you find this question helpful? Yes No
- hi, fits the loc line 1/2 "LOC-LINE NPT CONNECTOR into the 1" Bulkhead, sch. 40, Thread x Slip?
Ask Your Own Question
-
Does the job well Review by Great Bulkhead
Product Rating: I ordered 2 bulkheads to replace the metric bulkheads that came with my aquarium. I cleaned the surface with rubbing alcohol and hand tightened them with an additional 1/4 turn with a pipe wrench. Then I hooked up my plumping to the sump and leak tested it. It worked the first time, no leaks. (Posted on 2/12/2019)
-
Works as stated Review by Ryan
Product Rating: Got to me early. I hooked up with no silicone or thread tape and have had no problems since installing. Works perfect. (Posted on 7/26/2016)
-
great product Review by clowning around
Product Rating: Very happy with these bulkheads all 12 of them! This is the first time I have bought bulkheads and they didn't leak with just hand tightening. Will definitely be ordering all my bulkheads here from now on! (Posted on 5/22/2015)
-
Great item Review by Joe
Very straight forward item. Great construction and fit ment. (Posted on 1/1/2012)
-
Review by dbonn
(Posted on 11/4/2011)
-
1" bulk heads Review by J.B.
Good quality product, simple to use ,this is a hard to find product but Aqua Cave makes it easy. Good service as always. I have used these fittings previously for other projects they work great. (Posted on 4/22/2011)
-
Good but be careful Review by patchman
Over all the bulkhead is good. The only thing to watch is when you tighten the retainer nut/ring be cautious as it will crack. This part is somewhat more delicate than I think it should be. You will want to tighten this more than you should. It is just plastic. Don't get carried away. (Posted on 3/13/2011)
-
It does the job! Review by JWW
Well its hard to rate this. It got the job done and doesn't leak or didn't break during the install. The price was good too. (Posted on 5/26/2009)
Write Your Own Review
Related Products
-
0.5" Bulkheads, Sch. 80Starting at:
-
2" Bulkheads, sch. 40Starting at:
-
2" Bulkheads Sch. 80Starting at:
-
1" Bulkheads, Sch. 80Starting at:
-
1.25" Bulkheads Sch. 80Starting at:
-
0.75" Bulkheads, sch. 40Starting at:
-
Replacement Rubber Washer Sch. 80 BulkheadStarting at:
New Products
Shop by Brand
Air Equipment
Additives & Supplements
Aquarium Supplies
Aquariums
Calcium Reactors
Chillers
CO2 Components
Controllers and Accessories
Decorations
Dosing Pumps and Top-Offs
Filter Media
Filters and Media Reactors
Food and Feeders
Heaters
Lighting
Maintenance
Medications and Vitamins
Monitors and Testers
Overflow Boxes
Ozone Equipment
Plant Corner
Plumbing Supplies
Protein Skimmers
Pumps & Powerheads
Refugiums
Reverse Osmosis
Rock and Sand
Salt Mixes
Test Kits
UV Sterilizers
Wavemakers
On Sale
today's Deal
Innovative Marine Gourmet AQUA Gadget Gourmet Grinder
Regular Price: $24.99
Special Price $16.95
Time left to buy:
Loading...