847-775-0640 Call us M-F 9-5:30 CST

1" UNISEAL Flexible Bulkhead Tank Adapter

Product code: 887

Availability: In stock

Ships tomorrow if ordered in the next 21 hours and 3 minutes!

Reward Points Policy You will earn 122 AQUAPOINTS for buying this product.

1" UNISEAL Flexible Tank Adapter (bulkhead), For 3/8" Through 3/16" Wall Thickness Only...

1" UNISEAL Flexible Tank Adapter (bulkhead).
Why use an expensive bulkhead when you can use a Uniseal®? Just drill a hole in the pipe, tank or bucket, insert a Uniseal®, then put some Windex® on the end of the pipe and push it in. It's that easy! Feel like rubber, but they are made of DuPont Alcryn® rated to 40 psi and warranted for 25 years.
They are immune to cold, will not harden and hold pressure and vacuum.
The sizes below correspond to standard Schedule 40 PVC pipe.
* Fit tank wall thicknesses up to 1/2".
* Requires 1 3/4" size hole saw.
* Made in USA.

Questions on 1" UNISEAL Flexible Bulkhead Tank Adapter

No questions asked yet

Ask Your Own Question

  1. When a bulkhead just wont do... Review by AquaticDreamsCaper
    Product Rating:

    If there is any situation where a normal bulkhead just won’t do, these are a live saver...can be used in place of “most” bulkhead installations too!
    Make sure that your hole opening is correct size and free of any burrs or debris using light sanding or dremel bit if not smooth to touch. Apply generous amount of silicone lubricant to the end of pvc pipe surface before inserting into the uniseal and if the rubber feels dry it’s not bad idea to put alil silicone lube on inside edge that makes contact with pvc pipe before joining them together. Should slide in with just a little effort, wipe clean, and will be water tight right away.
    ADC (Posted on 10/28/2019)

Write Your Own Review

You're reviewing: 1" UNISEAL Flexible Bulkhead Tank Adapter

How do you rate this product? *

Product Rating: 1 stars 2 stars 3 stars 4 stars 5 stars
2.45 In stock