Eco Plus 7 Commercial Air Pump, 280W 200L/min

Questions on Eco Plus 7 Commercial Air Pump, 280W 200L/min

• From John Freeman at 10/8/2014 8:05 AM
  • We would like to connect a larger hose to this pump. the outlet fitting that is supplied is too small. are there other fittings available? We would like to connect a 1/2" or even a 5/8" hose.
  • Hello,
    You would need to look into a fitting like something listed in the link below
    
    http://www.aquacave.com/reducing-insert-coupling-0-5-insert-x-3-8-insert.html
    
    This will allow to to connect a 1/2" ID hose to this pump.
  • Do you find this question helpful?  Yes   No
• From francesco agostinelli at 10/18/2014 10:03 PM
  • I need an air pump for 50 aquariums of 40 gallons each.. This pump is for me??
  • Yes, this pump will handle 50 x 40 gal tanks without a problem.
  • Do you find this question helpful?  Yes   No
• From Dean D at 8/19/2015 10:12 PM
  • Can I use this pump to aerate a 1/3 acre 8' deep pond?
  • Yes this pump will be fine for your application.
  • Do you find this question helpful?  Yes   No
• From Leonard D at 12/7/2015 8:03 PM
  • Will the pump be able to maintain the specified air flow rates through a 10-15 m long tubing without large pressure drops?
  • Yes, as long as the tube stays the same size or is larger than pump's outlet.
  • Do you find this question helpful?  Yes   No
• From May at 5/12/2016 7:35 PM
  • Can this pump supply enough air to share between two commercial fish tank, each tank size is 120"x48"x16" (LxWxH)? Does this unit come with 3/8" hose to be connected between the pump's outlet and the multi outlet manifold?
  • Hi,
    This pump will give you approx. 7cfm of air which should be enough for 4 large diffusers. It comes with 3/8" barb outlet which fits 3/8" ID tubing.
  • Do you find this question helpful?  Yes   No
• From John Freeman at 9/29/2016 3:27 PM
  • We've been purchasing this pump for quite a while. It works very well in our application. The one problem we have is with the mounting feet deteriorating. Is there a replacement we can buy?
    
    We've also had some instances where the screws in the head loosened. Is there any reason we shouldn't apply a threadlocker to those screws?
  • John,
    The manufacturer informs us that there are no replacement feet available. They also said you can use thread locker on theses units to secure those screws.
    
    
    Thank you,
    Shaun
  • Do you find this question helpful?  Yes   No

Ask Your Own Question