847-775-0640 Call us M-F 9-5:30 CST

Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct

Product code: 7764
WM-MAX-FX350D

Availability: In stock

Ships tomorrow if ordered in the next 1 day, 11 hours and 42 minutes!

$519.98
Reward Points Policy Earn 5,199 AQUAPOINTS
OR
Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct
Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct

Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct 

  • Dimensions (LxWxH): 12.8" x 3" x 1.5"
  • Max Flow Rate: 5280gph (2 Times)
  • Power Consumption: 5w-52w
  • Ideal for Aquariums: 80 -800gal
  • Magnet holder rated for glass up to 3/4" thick

 

Contents:

  • XF350 Gyre Pump with Magnet Mount
  • Advanced 300 Controller with mount
  • Power Supply
  • Spare Rotors & Bushings
  • Snail Screens and
  • Flow Diverters

 

Power Supply Unit:

  • Model: GM85-240400-F
  • Input Voltage / Current: 100-240VAC 50/60Hz 2.5A
  • Output Voltage / Current: 24VDC 4A 
  • Weight: 300g /0.7 lb


Cable Length:10ft controller to pump, 5ft power supply to controller

*Specifications are subject to change without notice. Weight and dimensions are approximate.

 

The pump that revolutionized water flow for aquariums has reached the pinnacle of design, performance and control. The 3rd Generation aptly named the Gyre 300 series incorporates all of the amazing features of the original Gyre pumps and improved them to make the best GYRE flow pump yet. 

 Intuitive Design

The engineers at Maxspect completely redesigned the pump with less parts and a more intuitive assembly for easier maintenance of the rotors. All Gyre pumps include an extra set of rotors and bushings to help reduce downtime while cleaning and keep your pump operating at full capacity. The new design has simplified this process of rotor replacement making it easier than ever to keep your pump pushing water at full throttle. 

Smart Control

All of the Gyre 300 series pumps are compatible with the Maxspect Connect ICV6 control module so you can wirelessly control your pumps using the free Syna-G app from Maxspect. Any combination of pumps can be connected and controlled which means you can now operate a Gyre XF330 and an XF350 using the same control module all with a single power supply. This helps you to tailor the flow inside your aquarium perfectly to suite the needs of your corals without a ton of wires and bulky power supplies under your tank. 

Superior Performance

The most noticeable upgrade on the new Gyre 300 pumps is the detachable flow directors which are a welcome addition and allows you to place your pumps even closer to the surface of your aquarium without the worry of pulling a noisy vortex of air and improving surface agitation for maximum gas exchange. You can maneuver each director to point the Gyre flow of water where you need it. Best of all, the maneuverable caps block light from reaching the pump components and will reduce the rate at witch algae will accumulate for longer operation in between maintenance. 

 

Questions on Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct

  • From Scott Vandiver at 3/11/2019 4:20 PM
    • Two questions:
      1: In order to interface with the the iOS or Android app, is an additional device from MAXspect needed or is the app able to communicate directly to the Gyre XFR 350 controller?

      2: Will these devices interface with the Ice Cap Gyre to Neptune Apex variable speed interface device?

      Thank You
    • Scott,
      Thank you for contacting us.

      1) Yes, you will need to have an ICV6 module and run the pumps native controller (not the icecap module). IceCap module is not compatible with the Gyre 300 series.

      2) See answer #1
    • Do you find this question helpful?  Yes   No
  • From Ken F at 4/1/2019 12:54 PM
    • This follows on previous question.

      In the answer, it was indicated that to use iOS or Android app, "you will need to have an ICV6 module and run the pumps native controller." I'm not familiar with the ICV6 module, but checking online it looks similar to the existing controller I have for my XF250 pump (what I'm familiar with). So my question is this. Does the ICV6 module REPLACE the existing controller for a 350, or does it work WITH the existing controller for a 350?

      Thanks.
    • Ken,
      Yes, to connect ANY Maxspect product to the Syna-G app, you need the ICV6 module. Consider the ICV6 module the "hub" that connects everything to the App. The only product that cannot be connected to the App is the first generation RAZOR lights.
    • Do you find this question helpful?  Yes   No

Ask Your Own Question






  1. high flow is too powerful Review by Sun
    Product Rating:

    two pumps (on left and right side) in 180 gal tank (6 feet length). Level 10 is too powerful like tidal wave. I changed to level 3 which is medium flow.
    (Posted on 4/30/2019)


Write Your Own Review

You're reviewing: Maxspect Gyre XF 350 (DUAL) 2 Pump Kit w/Flow Direct

How do you rate this product? *

Product Rating: 1 stars 2 stars 3 stars 4 stars 5 stars
519.98 In stock
  Loading...