847-775-0640 Call us M-F 9-5:30 CST

Neptune Systems Flow Sensor - 1" with unions - FS100

Product code: 6263
CT-NS-FS100

Availability: In stock

Ships today if ordered in the next 9 hours and 0 minutes!

$59.95
Reward Points Policy Earn 599 AQUAPOINTS
OR

Neptune Systems Flow Sensor - 1" with unions - FS100

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe.

The flow sensor itself uses BSPP threads so for North American customers we have included two specially designed PVC unions with slip fittings to adapt it to standard 1″ PVC plumbing.  The FS-100 will work with flow rates from 150-1500 gph.

Neptune Systems Flow Sensor - 1" with unions - FS100

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe.

The flow sensor itself uses BSPP threads so for North American customers we have included two specially designed PVC unions with slip fittings to adapt it to standard 1″ PVC plumbing.  The FS-100 will work with flow rates from 150-1500 gph.

Questions on Neptune Systems Flow Sensor - 1" with unions - FS100

No questions asked yet

Ask Your Own Question






  1. Great but not perfect! Review by Brianalone
    Product Rating:

    These flow meters are a great option for me because I travel a lot and want as much information about my tank as possible. But you have to be careful when you install them or you will get skewed readings. Too close to an elbow or reactor and they will just show 0 gph so I had to rebuild my plumbing to get them working. (Posted on 9/22/2017)

  2. Product works great as long as you understand Apex "Speak" Review by Brian
    Product Rating:

    I have 3 of these flow meters on my reefer 250; one measures the drains so I know if they get clogged, etc, one measures the primary turn so I know how my pump is doing and the final one measures the throughput to my carbon reactor. It helps me fine tune the GPH and also tells me when the flow slows down. Since I have a DC return pump I can see how my adjustments are doing and also see how much flow is going at full power to compare to the specs on the pump. Since I travel a few days a week I really need to know if there are problems before they turn into damage. (Posted on 7/31/2017)


Write Your Own Review

You're reviewing: Neptune Systems Flow Sensor - 1" with unions - FS100

How do you rate this product? *

Product Rating: 1 stars 2 stars 3 stars 4 stars 5 stars
59.95 In stock
  Loading...