|
|
Frequently bought together
S453 Sweetwater Regenerative Blower 1 1/2HP
Sweetwater regenerative blowers are manufactured to AES Aquaculture Duty Specifications. Sweetwater blowers reach higher pressures, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers.
Sweetwater regenerative blowers are most often chosen by professionals in the aquaculture industry because of their reliability. They are inexpensive to operate, and the air they deliver is oil-free. They are extremely energy efficient and quiet.
Sweetwater® blowers are simple. And simplicity means reliability. They have only one moving part: a dynamically balanced impeller that is attached directly to the motor shaft. The rotating impeller doesn't touch a thing, so there's no wear, no vibration, no seals and no lubrication. Just wash the inlet air filters as needed and replace the motor bearings after three years of continuous operation.
Optional Inlet & Outlet Kits:
- Inlet Kits include air filter, PVC elbow, bushing nipple and pipe.
- Outlet Kits include PVC nipple, stainless steel clamps and 6" outlet hose.
S453 Specifications:
- 1 1/2 hp
- 65" max duty
- 230/460V 3 Phase
S453 Sweetwater Regenerative Blower 1 1/2HP
Sweetwater regenerative blowers are manufactured to AES Aquaculture Duty Specifications. Sweetwater blowers reach higher pressures, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers.
Sweetwater regenerative blowers are most often chosen by professionals in the aquaculture industry because of their reliability. They are inexpensive to operate, and the air they deliver is oil-free. They are extremely energy efficient and quiet.
Sweetwater® blowers are simple. And simplicity means reliability. They have only one moving part: a dynamically balanced impeller that is attached directly to the motor shaft. The rotating impeller doesn't touch a thing, so there's no wear, no vibration, no seals and no lubrication. Just wash the inlet air filters as needed and replace the motor bearings after three years of continuous operation.
All Sweetwater® blowers come with internal mufflers and low-restriction, washable inlet filters as standard equipment. Outlet flex hoses, which simplify installation, are also standard equipment.
Power cords are standard with Sweetwater® blowers through 1 hp. Each blower is assembled with antiseize compound, performance tested prior to shipment and guaranteed by AES for three years! They cost a little more, but they are worth it.
The Sweetwater® blower's electric motor is also superior. It is a high-efficiency type motor that will run cool and handle a wide range of power variations so often found in rural locations. For example, when wired for 115V, the 1-hp S41 will operate without problems down to 104 volts.
Automatic thermal overload protection is standard (except S631). Should a power brownout occur and trip the motor, the Sweetwater® blower will restart automatically after cooling. Motors are completely enclosed and fan cooled for the highest reliability in a humid aquaculture environment. Many Sweetwater® blowers have been in continuous use for over 10 years! All are UL listed, CSA certified and CE compliant.
Optional Inlet & Outlet Kits:
- Inlet Kits include air filter, PVC elbow, bushing nipple and pipe.
- Outlet Kits include PVC nipple, stainless steel clamps and 6" outlet hose.
S453 Specifications:
- 1 1/2 hp
- 65" max duty
- 230/460V 3 Phase
Questions on S453 Sweetwater Regenerative Blower 1.5HP
- From Selvon Villafana at
12/18/2020 8:06 AM
- Can the S453 be wired to 208 volts?
- Very good question – yes and no. In theory, a 10% voltage deviation on 230V operation is acceptable. However, voltage is rarely 100% stable, especially under load. If it went down to 206V you’d be outside of the range. We cannot recommend it for 208 for this reason.
If they don’t have the proper voltage available, we recommend that they use a buck-boost transformer to step it up. We don’t sell them, but that would be required so that the warranty for the motor isn’t void. Let me know if you have any questions. - Do you find this question helpful? Yes No