Simplicity DC-3200 Water Pump, 3,200GPH, 84W

Questions on Simplicity DC-3200 Water Pump, 3,200GPH, 84W

• From Mike at 5/17/2018 4:14 PM
  • The description says threaded output: 1.5". Is that thread size or inner diameter of the outlet?
    
    If I want to attach flexible hosing to the outlet, what's an appropriate connector here on the site?
  • Mike,
    Following sizes of barb fittings are included with this pump: 1.5” / 1.25” / 1.0” / 0.75”
    These sizes refer to internal diameter of the flexible tubing.
  • Do you find this question helpful?  Yes   No
• From Keith at 6/10/2018 3:37 PM
  • Can these pumps be run externally or do they have to be submerged ? I can’t find any information on there website.
  • Keith,
    We recommend to run these pumps in submersible configuration only.
  • Do you find this question helpful?  Yes   No
• From Robert at 8/10/2018 9:45 PM
  • Will this pump work with the apex controller?
  • Robert,
    Simplicity pumps are not able to be controlled via Neptune's Apex controller. You can plug this pump into Apex's outlet for on/off control but speed control has to be done via Simplicity's controller which is included with the pump.
  • Do you find this question helpful?  Yes   No
• From Jacob at 4/23/2020 4:42 PM
  • For the DC-3200, what will gph output be at 5 feet head?
  • Jacob,
    You can find the flow curve for these pumps in one fo the images at https://www.aquacave.com/simplicity-dc-3200-water-pump-3-200gph-84w.html
  • Do you find this question helpful?  Yes   No
• From James Budd at 10/14/2020 11:56 AM
  • will this pump work externally non submergible
  • James,
    These pumps are not designed to be installed in-line. Symplicity only recommends for these pumps to be used in the in-sump application.
    
    
    
    Albert Andrasz
    www.aquacave.com
    
    
    
  • Do you find this question helpful?  Yes   No

Ask Your Own Question