Tunze Calcium Dispenser Kit 68

Tunze Calcium Dispenser Kit 68

Kit 68 includes:

• calcium dispenser 5074
• Osmolator Universal 3155
• storage container 5002.25

Tunze Calcium Dispenser Kit 68

Kit 68 includes:

• calcium dispenser 5074
• Osmolator Universal 3155
• storage container 5002.25

Tunze 5074 Calcium Dispenser

Tunze 5074 Calcium Dispenser PRODUCT MANUAL 

The addition of lime water is another method to increase the calcium in saltwater aquariums. The calcium hydroxide is dissolved in a separate tank by means of the water jet of the metering pump in the osmotic regulator(s).
The lime water is then released into the aquarium in small quantities in regular intervals. The calcium dispenser is fitted between the metering pump and the infeed hose. All TUNZE® Osmolator, Osmomat and osmotic regulator sets can be used.
The calcium dispenser can also be installed in every water storage tank. The dispenser tank should be topped up with calcium hydroxide every one to two weeks.
The calcium dispenser and the calcium reactor can be combined well with each other. An especially well set pH stability is achieved during the day as well as at night. An increase in performance can be achieved for a larger consumption.
Delivery condition: Reactor, calcium hydroxide fill, holding device and connections to Osmolator, suitable for aquariums inhabited with stone corals and a volume of up to approx. 500 l (132 US gal.).
Dimensions: 350 x 140 mm (13.7 x 5.5 in.).

Tunze Osmolator 3155 Water Level Regulation System with NEW Magnetic Bracket

Water level regulator with two sensor holding devices, extension and numerous fastening accessories. It is suitable for use in cabinet filter plants, in Comline filters or on the edge of the aquarium.
This osmotic regulator can also be used in TUNZE SYSTEM cabinet filter plants. 
The sensors can be stuck to glass surfaces or can be fitted directly to the edge of the tank.
Delivery condition: Ready for mounting with power supply unit, metering pump, hose, sensor holding device.

The precise water level is ensured by a non-wearing optical sensor and a transistor switch without any moving parts. This sensor is insensitive to soiling, light or magnetic fields.
Its “automatic eye” recognises the water level precisely, even small waves or level variations cannot irritate the unit.
An independent safety sensor with a separate power supply circuit and relay control ensures reliable overflow protection.
An electronic time controller and current limiter for the pump connected result in a higher operational safety. This unit protects the metering pump against running dry and reports an empty storage container.
All functions are clearly displayed by LEDs; safety messages are also indicated by acoustic signals.
The osmotic regulators are all operated at safety extra-low voltage.

Metering pump capacity: 

@ 0.9 m (35.4 in.): 52 l/h (13.7 US gal./h)
@ 1.5 m (59 in.): 47 l/h (12.4 US gal./h)
@ 2 m (78.7 in.): 27 l/h (7.1 US gal./h) 
Hmax: 2.2 m (86.6 in.).

Osmolator Universal 3155.000 Product Manual